MTAP1000M0WW Hotpoint Washer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I bought this second hand and it had no hose
I watched the video you provided and I could't believe how simple it was. I'm 67 yrs old and I just followed the video instructions.
Parts Used:
-
Maryellen from Englewood, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Washer leaked water every time you ran it.
Disconnect the water lines. Remove the three screws holding the instrument panel on. Tip the instrument panel forward out of the way. (Be careful with instrument panel, because after you remove screws, you have to tip it a little and then slide it to the right about a half inch to release the lower clips) Remove the two screws and the hose connection on the triple water valve and swap it out. It's pretty straight forward.
Parts Used:
-
Francis from Gloucester, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!