Models > MRE30S > Instructions

MRE30S Dacor Range - Instructions

All Instructions for the MRE30S
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Temp sensor is failing
I did not do the repair since the part shipped was not the correct one. I have contacted Customer Service by phone and mail and nothing has been resolved.

I would, at least, like to return the incorrect part. An new one would be great but not holding out hope.
Parts Used:
SVC-TEMP SENSOR KIT ROBERTSH;86663,ERSD3
  • Sarah from FORT COLLINS, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the oven didn't heat up on bake
didn't know if this was going to fix it, but i ordered a bake element anyway from a very frendly and knowledgeable lady in nova scotia whom i couldn't talk into coming down here to install it for me, but when the element arrived, i removed the oven door and removed the two grates, removed 2 screws from the element in the back of the oven and pulled out the element. then hooked up the 2 wires to the new element and then had a slight problem getting the 2 screws reassembled, but got it done. pam prayed, and then baked some bread and it worked perfectly. i'm quite satisfied with one more problem solved!!! ready for the next one!!!
Parts Used:
SVC-BAKE ELEMENT 30 OVEN;62637,ECD230SBK
  • Bob from Latrobe, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the MRE30S
1 - 2 of 2