Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MMV5186ACW

MMV5186ACW Maytag Microwave - Overview

Get Parts and Repair Help for MMV5186ACW

If you know the microwave repair part you need, you can browse the list of all parts on the MMV5186ACW, or you can search by name or part description. You can also find your part by where it is located on the MMV5186ACW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for MMV5186ACW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.50

Light Bulb - 40W

The 40W lightbulb is found in the interior of your microwave, which will need to be replaced if you have noticed the light is no longer coming on after opening the door. The light ...

Order within the next 6 hrs and your part ships today!
$6.85

Light Bulb - 120V 25W

This light bulb is a 120 volt, 25 watt incandescent appliance light bulb with a small base screw-in that fits in a variety of appliances such as microwaves, refrigerators, freezers, cooktops, or stoves. Its purpose is to light up the appliance when the door is open. This is a genuine OEM part. You may need to replace the light bulb if the existing bulb is burnt out or broken. This light bulb is sold individually and is a common wear part, it is recommended to order a spare.

Order within the next 6 hrs and your part ships today!
$4.89

Light Cover - Clear

Surface light cover protects and covers the cooktop light under the microwave. The light cover is made of clear plastic which can become cracked or damaged from constant use of the...

Order within the next 6 hrs and your part ships today!
$3.02

SCREW

Sold individually.

Order within the next 6 hrs and your part ships today!
$10.81

Circular Turntable Support with Wheels

This roller guide sits underneath the glass turntable tray.

Order within the next 6 hrs and your part ships today!
$52.44

Door Interlock Switch Kit

This part is a genuine manufacturer door interlock switch kit, also known as primary micro switch or microwave switch kit, for a microwave. The function of this part is to sense when the door of the microwave is open or closed. If the part is defective, the microwave will not start or will start when door is open. This kit contains two 15 Amp, 125/250 Volt switches with 3/16 inch terminals. Be sure to disconnect power to microwave before replacing part. Use extreme caution when replacing microwave parts, as high-voltage capacitors can retain an electrical charge when unplugged.

Order within the next 6 hrs and your part ships today!
$19.16

Grease Filter

Order within the next 6 hrs and your part ships today!
$9.32

Charcoal Filter

Order within the next 6 hrs and your part ships today!
$43.97

Microwave Turntable Cooking Tray

This microwave turntable cooking tray is twelve inches in diameter, and is made of glass.

Order within the next 6 hrs and your part ships today!
$4.62

Wave Guide Rivet

This rivet is used for the stirrer cover/wave guide. They are sold individually.

Order within the next 6 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island, WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 62 of 73 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

burned out bulb

  • Customer: john from plainfield, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 20 of 27 people found this instruction helpful
removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again. read more

Burned out light bulbs in microwave hood stove

  • Customer: Herbert from Norton, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 18 of 23 people found this instruction helpful
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold th... read more