Models > MMV5186AAQ

MMV5186AAQ Maytag Microwave - Overview

Get Parts and Repair Help for MMV5186AAQ

If you know the microwave repair part you need, you can browse the list of all parts on the MMV5186AAQ, or you can search by name or part description. You can also find your part by where it is located on the MMV5186AAQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for MMV5186AAQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.46

Light Bulb - 40W

Sold Individually.

$2.70

SCREW

$6.19

Bulb - 120v 25w

$4.46

Light Cover - Clear

Note: As per the manufacture the original cover was made with one hole, the part is now made with three holes.

$15.39

Grease Filter

$35.24

Cooking Tray

$10.39

Circular Turntable Support with Wheels

$9.40

Charcoal Filter

$44.27

Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.

$2.70

Wave Guide Rivet

This rivet is used for the stirrer cover/wave guide. They are sold individually.

Common Symptoms of the MMV5186AAQ [Viewing 1 of 37]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 29 of 35 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

burned out bulb

  • Customer: john from plainfield IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 11 of 14 people found this instruction helpful
removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again. read more

No Power to Microwave

  • Customer: John from Palos Hills IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 18 of 35 people found this instruction helpful
After determined the problem on one of the websites...I received the part I needed... removed the control panel and installed the new main fuse In about 15 mins! read more