Models > MMV5186AAB

MMV5186AAB Maytag Microwave - Overview

Get Parts and Repair Help for MMV5186AAB

If you know the microwave repair part you need, you can browse the list of all parts on the MMV5186AAB, or you can search by name or part description. You can also find your part by where it is located on the MMV5186AAB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for MMV5186AAB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.54

Light Bulb - 40W

Sold Individually.

Order within the next 4 hrs and your part ships today!
$2.70

SCREW

Order within the next 4 hrs and your part ships today!
$5.30

Bulb - 120v 25w

Order within the next 4 hrs and your part ships today!
$12.37

Light Cover - Clear

Note: As per the manufacture the original cover was made with one hole, the part is now made with three holes.

Order within the next 4 hrs and your part ships today!
$33.91

Cooking Tray

Order within the next 4 hrs and your part ships today!
$13.13

Grease Filter

Order within the next 4 hrs and your part ships today!
$10.61

Circular Turntable Support with Wheels

Order within the next 4 hrs and your part ships today!
$4.02

Wave Guide Rivet

This rivet is used for the stirrer cover/wave guide. They are sold individually.

Order within the next 4 hrs and your part ships today!
$44.59

Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.

Order within the next 4 hrs and your part ships today!
$7.93

Single Shelf Holder

Order within the next 4 hrs and your part ships today!

Common Symptoms of the MMV5186AAB [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 34 of 41 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

Burned out light bulbs in microwave hood stove

  • Customer: Herbert from Norton MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 12 of 14 people found this instruction helpful
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold th... read more

burned out bulb

  • Customer: john from plainfield IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 11 of 15 people found this instruction helpful
removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again. read more