Models > MMV5165AAW

MMV5165AAW Maytag Microwave - Overview

Get Parts and Repair Help for MMV5165AAW

If you know the microwave repair part you need, you can browse the list of all parts on the MMV5165AAW, or you can search by name or part description. You can also find your part by where it is located on the MMV5165AAW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for MMV5165AAW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.46

Light Bulb - 40W

Sold Individually.

$2.70

SCREW

$13.02

Air Filter

Sold individually.

$6.58

Bulb - 120v 25w

$11.80

Black Sleeve Diode

$44.27

Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.

$15.25

Charcoal Filter

$67.96

Rectangular Cooking Tray

$2.70

Wave Guide Rivet

This rivet is used for the stirrer cover/wave guide. They are sold individually.

$2.70

Cabinet Screw

This screw is sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sparks and loud hum from oven

  • Customer: Guy from Bellingham MA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 40 of 64 people found this instruction helpful
1. I went to the internet to find the service manual for the Maytag microwave.
2. I opened up the oven and started measuring the resistance of the diode, capacitor, transformer, and magnetron between terminals and then to ground. The transformer and magnetron were well within the resistance limits. The diode was shorted in both directions(+-). The capac... read more

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 27 of 33 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

Burned out light bulbs in microwave hood stove

  • Customer: Herbert from Norton MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 12 people found this instruction helpful
I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold th... read more