Models > MMV5100AAW

MMV5100AAW Maytag Microwave - Overview

Get Parts and Repair Help for MMV5100AAW

If you know the microwave repair part you need, you can browse the list of all parts on the MMV5100AAW, or you can search by name or part description. You can also find your part by where it is located on the MMV5100AAW by selecting a section below. We’ve also included any installation videos we have for MMV5100AAW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.66

Light Bulb - 40W 120V

Sold individually.

$6.58

Bulb - 120v 25w

$14.11

Carbon Air Filter

$19.50

Grease and Air Filter

$47.41

Turntable Drive Motor

This motor rotates the glass turntable in the microwave.

$2.70

SCREW

$3.83

SCREW

$2.70

SCREW

Sold Individually.

TURNTABLE

$74.23

CAPACITOR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Turntable on Maytag MMV5100AAW Stopped Turning

  • Customer: Tim from Oviedo FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 33 of 34 people found this instruction helpful
Symptom: Turntable stopped turning. Was able to remove the glass tray in the microwave and the little cam that drives the glass tray was barely turning. Control on microwave to turn the turntable on/off was working as evidenced by the cam not turning when I turned off the turntable. When I turned the cam manually, I could feel the motor turn so I knew the... read more

turntable motor was bad.

  • Customer: CHARLES from HOLCOMBE WI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 4 of 5 people found this instruction helpful
fliped it upside down and took of the panel un screwd the motor and un hooked the wire leads.then revesed the process. read more

Plastic air vent-grille cover on top portion of microwave broke at both attachment areas.

  • Customer: Frances from Vista CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 9 people found this instruction helpful
Ordered the new vent-grille air cover on a Saturday before Thanksgiving. The part arrived on Thanksgiving week (no mail delivery on Thursday) on Friday.

The installation was a breeze! First I removed the two screws that hold the element in place. I then pulled the element off. I inserted the new vent-grille cover and replaced the two screws. ... read more