Models > MMV5000BDB

MMV5000BDB Maytag Microwave - Overview

Get Parts and Repair Help for MMV5000BDB

If you know the microwave repair part you need, you can browse the list of all parts on the MMV5000BDB, or you can search by name or part description. You can also find your part by where it is located on the MMV5000BDB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for MMV5000BDB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.




Air Filter

Sold individually.


Bulb - 120v 25w




Black Sleeve Diode


Glass Cooking Tray


Charcoal Filter

It has a metal perimeter, a metal mesh exterior, and a black charcoal interior.


Turntable Guide with Rollers

This roller guide sits underneath the glass turntable tray.


Turntable Motor

This motor rotates the glass turntable in the microwave.



Common Symptoms of the MMV5000BDB [Viewing 1 of 49]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No Power to Microwave

  • Customer: John from Palos Hills IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 18 of 35 people found this instruction helpful
After determined the problem on one of the websites...I received the part I needed... removed the control panel and installed the new main fuse In about 15 mins! read more

Turntable wheel broke off

  • Customer: R. from Hudson FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 11 of 15 people found this instruction helpful
Just replaced it with the part that was sent -- no physical tools used.

The part was sent when promised and arrived promptly. I would recommend this company for part replacements. read more

Microwave turntable would not turn

  • Customer: Frederick from Scottsdale AZ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 6 of 6 people found this instruction helpful
Turned off circuit breaker to microwave. (Built-In microwave). Unscrewed four screws at bottom panel of microwave to expose electrical wires/plastic plug to existing microwave motor.
Disconnected plastic plug/clips to motor and microwave lights(to allow entire bottom panel to drop down fully from back hinges). Unscrewed mounting screw for motor and rem... read more