Models > MMV4205BAB > Instructions

MMV4205BAB Maytag Microwave - Instructions

All installation instructions for MMV4205BAB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MMV4205BAB
16-26 of 26
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

microwave acts like its working but won't heat.

  • Customer: Mike from Paso Robles CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Replaced the magnetron and diode. Microwave works prefect now.

Broken roller guide & Tray

  • Customer: Yolanda from Modesto CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just replaced the cooking tray & turntable roller guide. No repairs needed

Rotating Tray fails to turn

  • Customer: JIM ODANIELL from WILMINGTON NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Very easy. Opened the Microwave door, removed the dish and replaced the coupler.

Had to replace charcoal filter.

  • Customer: Calvin from Houston TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Part arrived on March 15. When I went to install it on March 16 I found that it was the wrong size. On the same day I emailed PartSelect of the problem. They responded via email the same day and advised that the correct filter had be located and was being shipped. In addition, a separate e-mail had shipping instructions and an address label. On March 18 the part was returned and presently I am awaiting the replacement part. Todate I am well pleased with PartSelect's responsiveness and handling of the matter.

tray would not rotate

  • Customer: Denise from Clovis CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Snapped the coupler in place. Took one minute.

Turntable didn't work

  • Customer: Jeff from Apex NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I purchased this in-cabinet microwave off the show floor from a local electronics store. Part of the risk of buying this way is that some things may not work, like the turntable! Turns out it was a simple fix. The coupler piece is just a piece of plastic and was broken. It was easily replaced by lining up the new piece and inserting, easy-peasey! On a side note, I was very impressed with PartSelect's response time. I found them by a simple online search and ordered on a Sunday. The part was at my house by Tuesday! Their online inventory monitoring was accurate and I didn't have to wait for anything I ordered!

The turntable on the Microwave stopped turning

  • Customer: Julie from Seattle WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Asked at Best Buy what our options were after I described the problem. They said to buy a new Microwave. I thought No way it is only a few years old. Whent home did som research and found your site and for under $5.00 My microwave turn table turns again!

Cooking tray shattered

  • Customer: Valerie from Rock Springs WY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
My daughter was trying to run the microwave timer and ended up nuking the cooking tray, which shattered. First web place I found wanted 55$ for this tray and this site sold it for 19.99. It shipped super quickly. I am very pleased with this company!

mistaked and turned the microwave on with nothing it it. The turntable roller caught on fire and burned the glass cooking tray before I had a chance to turn it off.

  • Customer: Mary from Glenville PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
ordered the parts came within 4 days and the problem was fixed. very easy to order and customer service was great.

Tray inside would not rotate

  • Customer: al from lexington SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed old coupler with my fingers and installed new one on shaft. Works fine.

no power

  • Customer: Glenn from Pedricktown NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
took THERMOSTAT;NT-101NA,250 out and put THERMOSTAT;NT-101NA,250 in so easy got the part in LESS 19 HRS
All Instructions for the MMV4205BAB
16-26 of 26