Models > MMV4205AAW

MMV4205AAW Maytag Microwave - Overview

Get Parts and Repair Help for MMV4205AAW

If you know the microwave repair part you need, you can browse the list of all parts on the MMV4205AAW, or you can search by name or part description. You can also find your part by where it is located on the MMV4205AAW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for MMV4205AAW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Air Filter

Sold individually.


Light Bulb - 120V 25W

Sold individually.



Sold individually.


Black Sleeve Diode


Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.


Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.


Circular Turntable Support with Wheels

This roller guide sits underneath the glass turntable tray.


Charcoal Filter


Mounting Bracket

Mounting hardware sold separately.


Wave Guide Rivet

This rivet is used for the stirrer cover/wave guide. They are sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 44 of 51 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

loud buzzing noise

  • Customer: Sandra from coto de caza CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 37 of 72 people found this instruction helpful
The repair went well...I am so glad that I read this info before buying a new saved me lots of money. I did have a repair man come and look at it and he told me to buy a new one but it cost alot of money when it wasn't necessary. I did the repair and I was very proud of myself.
Three men watched a woman fix this and it was no problem...... read more

Close the door on the microwave, punch in the # nothing happened

  • Customer: Robert S. from Stafford TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 12 of 17 people found this instruction helpful
I removed the unit from the wall. Took the cover off. Set the unit on its side. It revealed the working parts. Removed the old micro switches. Put in the new oness. Presto, it worked. Very easy for me.
The parts was delivered almost before my notice they were shipped. read more