This is a bottom-mounted air filter manufactured for a microwave. The microwave air filter filters the air flowing in and out of the microwave, and traps grease from the exhaust. A dirty or clogged fi...
If you discover that the glass cooking tray in your microwave is damaged, you may have to replace it to operate the microwave properly. The glass cooking tray connects to the turntable of the microwav...
This high-voltage diode is designed for use within various makes and models of microwaves and is a genuine OEM part that converts alternating current (AC) into direct current (DC). If you notice your ...
This is a mounting bracket for a microwave. The part is fitted between your microwave and wall to allows you to secure your appliance safely to the wall studs and install it above your range. It is ma...
This is a micro switch, which is also known as a door switch for your microwave. The main reason for needing to replace this part is if you are not getting heat to your appliance. The door switch is l...
This is a high limit thermostat designed for use within various models of microwaves. The purpose of a high limit thermostat is to open the circuit of the appliance when the internal temperature reach...
This charcoal filter is used in conjunction with your microwave. This part measures to be about 9 inches wide, and 4 inches deep. The middle is charcoal colored with an outer chrome-colored boarder. T...
This vent damper is a genuine OEM replacement part that is compatible with various models of Samsung over-the-range microwaves with ventilation systems. It is responsible for regulating the airflow in...
$18.90
In Stock
Questions And Answers for MMV4203DQ00
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Edward
September 2, 2022
How do remove the door to replace the broken latch (that I will order)
For model number MMV4203DQ00
Hi Edward, thank you for contacting us. You can use a Phillips head screwdriver to unthread the two screws securing the front vent. Use a putty knife to help pry off the vent. With the vent removed, you can lift off the door, set the door down on a towel or blanket. Use a putty knife to help detach the inner door trim. Unthread the four screws securing the inner door assembly. Use a large flat-head screwdriver to help separate the inner door assembly from the outer door panel. Use needle nose pliers to remove the door latch spring. Slide the old door latch up to remove it. Install the new door latch, part number PS4231065, by inserting the latch tabs into the slots. In the inner door assembly reinstall the spring, realign the inner door assembly with the outer door panel and snap it into position. Rethread the screws, align and snap the trim into place. Reinstall the door assembly by inserting the hinge pins into the holes. Reinstall the front vent by aligning the top edge first, then press the bottom edge into place, thread the two screws to secure. Let us know if you have further questions.
Was this helpful?
Thank you for voting!
Frank
December 9, 2022
Fan won't stop running when door is open. shuts off when door is closed except when time to run is on. Thanks
For model number MMV4203DQ00
Hello Frank, thank you for contacting us. The issue is most probably related to a faulty door switch, part number PS11741686. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
This was no big deal. Just inserted the new gadget under the turntable. It beginning turning as soon as I pressed start on the microwave.
What I was impressed with, is that I ordered it on line, and within two days my part was sitting on my front porch. I was very happy about the delivery. I live in a remote area, and didn'
... Read moret expect it for a week. Thank you.
We ordered part from store where we bought the microwave. We waited a week and the part was not the right one. I found the part I needed at your company. I received the part the next day. I just inserted the coupler in the hole where the other one was and fixed the problem imediately. We will buy all our parts here from now on.
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten