This is a bottom-mounted air filter manufactured for a microwave. The microwave air filter filters the air flowing in and out of the microwave, and traps grease from the exhaust. A dirty or clogged fi...
This high-voltage diode is designed for use within various makes and models of microwaves and is a genuine OEM part that converts alternating current (AC) into direct current (DC). If you notice your ...
This is a mounting bracket for a microwave. The part is fitted between your microwave and wall to allows you to secure your appliance safely to the wall studs and install it above your range. It is ma...
This is a micro switch, which is also known as a door switch for your microwave. The main reason for needing to replace this part is if you are not getting heat to your appliance. The door switch is l...
This is a high limit thermostat designed for use within various models of microwaves. The purpose of a high limit thermostat is to open the circuit of the appliance when the internal temperature reach...
The microwave light, or surface light lens, keeps the bulb in your microwave protected from getting cracked, scratched, and damaged. If your lens is defective or broken, or the bulb in your appliance ...
This is the main latch assembly for various models of Samsung microwaves. This assembly is a main component for the door of the microwave that features three switches that detect the door itself and h...
This vent damper is a genuine OEM replacement part that is compatible with various models of Samsung over-the-range microwaves with ventilation systems. It is responsible for regulating the airflow in...
$18.90
In Stock
Questions And Answers for MMV1153BAS
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
December 27, 2019
Unit started to turn the opposite direction when you opened the door. Then it stopped working. Then it started to work again and quit working.
For model number MMV1153BAS
Hello Mark and thank you for writing.
It certainly sounds like a faulty thermostat PS4226431 you should check for signs of damage, and replace it if needed. We hope this helps. Please contact us anytime.
I need to replace the turntable motor, but I can't get to it
For model number MMV1153BAS
Hello Mike, Thank you for the question. You will need to remove the screws from the bottom plate on the underside of the appliance. There will be one screw and a small tab hold the motor drive in place. Remove the two wires from the motor and connect to the new motor. Replace the motor with the tab and screw and replace the bottom plate. Hope this helps!
Was this helpful?
Thank you for voting!
Bill
February 19, 2020
Using kitchen timer and that whole unit just shut off no power
For model number MMV1153BAS
Hello and thank you for writing.
Have you checked your breaker panel in your house if the unit possibly tripped the breaker? If that is all ok, make sure to check the power cord. If that seems ok the next thing to check is the line fuse in your unit. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Charlotte
March 29, 2022
The light was blinking sparking
For model number MMV1153BAS
Hello Charlotte, thank you for writing. A microwave flashing from the inside could be the sign of a dirty or faulty metal wave guide( stirrer) cover inside your appliance. The part may be PS4234000.The Button to hold it in place is part PS4231181. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten
I ordered a new coupler and dropped it into the center hole, jiggled it until it fell into place, put the turntable back on the track, and voila, fixed! It was ridiculously easy.