This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
In Stock
Order within the next 11 hrs and your part ships today!
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
In Stock
Order within the next 11 hrs and your part ships today!
The leveling leg locking nut is an OEM replacement fastener for use in dryers and washers. It has a head diameter of 3/8 inches and a thread pitch of 16 threads per inch. The nut secures the leveling ...
$7.76
In Stock
Order within the next 11 hrs and your part ships today!
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
$22.68
In Stock
Order within the next 11 hrs and your part ships today!
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original. The hose clamp is about 2 inches in diameter and made of stainless steel...
$9.81
In Stock
Order within the next 11 hrs and your part ships today!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
$12.60
In Stock
Order within the next 11 hrs and your part ships today!
Order within the next 11 hrs and your part ships today!
Questions And Answers for MHW6630HC0
Ask our experts a question about this model and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mikail
March 18, 2023
Stuck on sensing fill help me please
For model number MHW6630HC0
Hello Mikail, Thank you for your inquiry. If the washer will not advance from sensing, this is usually an issue with either the water inlet valves, the water level pressure switch or the door lock assembly. When the washer is on the sensing cycling, it will lock the door, and tell the pressure switch to check the water levels and tell the water inlet valves to fill the washer. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
Hello, my dial on my Maytag front loader fell off and it came apart in three sections. I can't find if I can buy a new dial or how do you put this back together so that I can use my washer
For model number MHW6630HC0
Hi Jennie, thank you for reaching out. The knob does not come separately, you need to buy the whole console assembly, part number PS12711863. We hope this information is useful!
Fabric softener does not dispense every time. Removed and cleaned tray and tray slot already.
For model number MHW6630HC0
Hello Dianna, Thank you for the question. We suggest testing the Water valves. Set your multitester to the ohms resistance scale X 1. Place each of the meter's probes to one terminal. Because the reading can vary from brand to brand and from model to model, there is no one reading you should receive. However, if your test produces a reading of infinity, then the solenoid is bad and the water valve should be replaced. We hope this solves your problem!
Hi Pam, thank you for the question. The drain hose you are looking for is part number PS12584563. This drain hose with elbow bracket is 6 feet long. Glad to be of help!
What does this code (LOC w/Key Flashing below) mean?
For model number MHW6630HC0
Hi Monica, thank you for reaching out to PartSelect. According to our research, the error code you mentioned for your model indicates that your washer control lock has been activated. To unlock the control, you have to touch the control lock button and hold it for 3 seconds. For each second the control lock is being held down, the display will count down 1 second; you will see 3, then 2, then 1. Glad to be of assistance!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol
... Read moreoring refer handles. Thank you
Replaced the Whirlpool washer water inlet valve. 1. Unplug washer 2. Close Hot and Cold water valves 3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove. 4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps.
... Read more />5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little. Replace with the new one, connect hoses, put cover back on, open valves, plug it in. 6. Ran washer and Fabric Softener dispenser now works
