Make sure you haven't got the discount earlier.
Parts That Fix Maytag Washer MHW6000AW0 Lid or door won’t close
Lid or door won’t close is a commonly reported symptom for the MHW6000AW0 Maytag Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your MHW6000AW0 Maytag Washer that will fix Lid or door won’t close. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This is a door hinge, which allows for your washer door to properly shut during the washing cycle, and open after it is finished. If your door hinge is bent or broken and not allowing the door to shut properly, this hinge needs to be replaced immediately. Replacing this hinge will require a screwdriver to remove and install. This door hinge is an OEM part made of durable metal, and does not come with any other parts, like the necessary securing screws or install bracket.
Customer Repair Stories
Pins broken off hinge
-
Patrick from ROCHESTER, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
One of the hinges broke, making the door sag
-
Sandy from MILWAUKIE, OR
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
This part attaches to the door and fits into the door lock when the door closes.
Customer Repair Stories
Broken Strike on Washer Door - prevented door from latching, and washer would not start
-
David D from Severn, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Replacing your Whirlpool Washer Door Lock/Latch
Customer Repair Stories
Washer would not start reliably.
-
Andrew from ROCKVILLE, MD
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
broken door latch
-
Marvin J. from NICHOLASVILLE, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
This is a dryer door hinge cap, also known as a bushing, which is a durable plastic cap that is installed on the door hinge and is used to allow your dryer door to operate smoothly when opening and closing. If the door for your dryer is not properly opening and closing, this cap needs to be replaced immediately. To replace this door hinge bushing, you will need a screwdriver to remove and disassemble the door for your dryer. This door hinge bushing is sold individually, but normally wears at the same rate as the others within your dryer door, so order as many as are needed.
Customer Repair Stories
Shipping delay FedEx four days in Chicago was curious.
Be gentle with plastic components.
-
Edward from WADING RIVER, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
Dropped Dispenser Drawer
-
Palma from CLERMONT, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins