Models > MH7140XFB0 > Instructions

MH7140XFB0 Whirlpool Microwave - Instructions

All installation instructions for MH7140XFB0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MH7140XFB0
61-75 of 165
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

BURNT OUT LIGHT BULB REPLACEMENT

  • Customer: alfred from summerville SC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 6 of 17 people found this instruction helpful
OPEN COMPARTMENT, INSTALLED BULB, CLOSED COMPARTMENT

Dropped the glass cooking tray and it broke in half

  • Customer: Emily C from Brandon MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!

E. Robinson

Broken Microwave Grill

  • Customer: Charles from Land o Lakes FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 3 people found this instruction helpful
Placed Grill and tightened screws. It was trivial and the part was perfect.

The old coupling melted and the tray cracked in half.

  • Customer: Diane from Sheridan AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 3 people found this instruction helpful
It took me 15 minutes total - 5 minutes to clean the microwave, 1 minute to install three new parts, and 9 minutes to enjoy my celebratory glass of wine!

Turntable coupling

  • Customer: Laura from Port St Lucie FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 3 people found this instruction helpful
Rep knew exactly what I needed when I described where the part should go on my microwave - price great - shipping great - installed in seconds. Thank you!

plastic holders broke on our vent grille

  • Customer: kristen from poynette WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
We took off the old grille - and simply screwed on the new one. Easy peasy.

broken tabs for the vent cover

  • Customer: tom from saint james MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
I removed the broken tabs with a screwdriver and snaped in the new cover replacing the screws once I had it in place. the entire job took less than 5 min.

Glass plate of Microwave missing from an in bulit microwave

  • Customer: Martin King from Silver City NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Glass plate arrived in less than two days. Placed the glass plate in Microwave and presto the microwave works like a charm.

glass turntable in microwave cracked in half while cooking

  • Customer: barbara from phoenixville PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
submitted manufacturer info to website and voila! a new glass turntable arrived in 2 days. I don't do well with computers, my 23 yr. old daughter was impressed......couldn't be easier! thanx! will definitely revisit your site

Broken Vent Grill

  • Customer: Jaime from Melbourne FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
Removed screws holding tabs from broken vent grill to microwave frame.

Carefully snapped new grill vent into slots on top of microwave and slid tabs into slots on top of the frame.

Replaced the two screws in the tabs.

Finished

BROKEN MICROWAVE GLASS TURNTABLE

  • Customer: MICHELLE from BROOK IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
ALL I HAD TO DO WAS OPEN THE MICROWAVE DOOR AND PLACE THE TURNTABLE ON THE DESIGNATED GROOVES, WHA LAH IT FIT. I AM NOW BACK IN BUSINESS. THANKS TO PartSelect, I found my replacement, ordered and it was shipped in no time.

vent grill tabs broke off

  • Customer: KENNETH from ROGERSVILLE AL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
took old vent grill and tabs off using phillip screwdriver. started putting new grill on and it wouldnt go on. got to looking and there are two more screws that you have to loosen up so the grill will go into place these two screws are between the two tabs at each end. caution do not over tighten the screws it will break the tabs. overall easy to install.

Glass tray shattered

  • Customer: Mouang from Sacramento CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Ordered the glass tray and installed it. Received the orderin about two days.

broken

  • Customer: Donald from Pompano Beach FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
put the turntable in and had a Rum and Coke to celebrate. Your service was GREATTTTTT...

The vent grill was broken

  • Customer: Norma G. from Poinciana FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
I remove the old broken Grill Vent by loosing two screws and just put the new one and adjusted with the same two screws.
All Instructions for the MH7140XFB0
61-75 of 165