All Installation Instructions for Whirlpool Microwave MH1150XMQ0

Plastic tabs broke and the grille fell off.

Removed the screws holding the broken tabs and thought the new vent grille would click right into place. I had quite a bit of trouble getting all the tabs lined up to click into place, but was finally able to do it. Then I just used the old screws to secure the new grille.

Parts Used:

Vent Grille - Black

DIANA from BORDEN, IN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

vent grille was knocked loosesomehow. allthe holes for the screws were broken

Removed the screws from the damaged sections and replaced the new vent grille. Less than 5 minute fix, and saved me over a 100 dollars according to the quote I got. Thanks

Parts Used:

Vent Grille - Black

Benita from Port Orange, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Vent grill had fallen and cracked

Replacement part was perfect and a quarter the price of the brand name grill. Snapped it in, tightened 2 screws, done! Also delivery of the part was almost overnight. You guys are the greatest.

Parts Used:

Vent Grille

Barry from Boca Raton, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

it was working fine and it stopped order a fuse and it wasn't the problem

took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse

Parts Used:

R CERAMIC FUSE,20A/250V,MHC

Herb from Auburn, IN
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Foreclosed home: parts were missing

Having the correct model number helps:
Just place the parts in the microwave and it worked.

Parts Used:

RING-TURN

Glass Cooking Tray

OLIV from OAKLEY, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Vent grill was broken

Just remove the old one, inserted the new grill and tightened the screws on the top of the microwave.

Parts Used:

Vent Grille - Black

Sadagopan from Frisco, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Microwave grill broken...

Unscrewed existing screws, removed old grill, fit new grill into proper slots, reinstalled and tightened screws.

Parts Used:

Vent Grille - Black

Douglas from Eureka, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burnt Out Light Bulb Replacement

Open compartment, installed bulb, closed compartment

Parts Used:

Light Bulb - 40W

alfred from summerville, SC
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

9 of 30 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!

Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!

Parts Used:

R CERAMIC FUSE,20A/250V,MHC

Stephen from SPRINGFIELD, WV
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers

4 of 16 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

unit inop intermittent code f2

removed upper grill- removed phillips screw from control panel- lift up on panel to remove. Control panel is held in place with 2 phillips screws (remove) disconnected electrical connectors- connected new panel and reinstalled in reverse order. use caution removing wire connectors as they are locking type (squeeze tab to disconect)

Parts Used:

PANL-CNTRL

Scott from Gretna, NE
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

1 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The door cracked and the door handle fell off.

I removed the screws to the old handle and screwed on the new one

Parts Used:

Door Handle

Kerry from Edwards, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

32 of 101 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The microwave door would not stay latched, so it wouldn't come on.

The repair was easy, I just took off a few screws and found the broken latch spring. The real story is how easy it was to find the replacement spring from Partselect! I couldn't believe they had it, and even better yet, I ordered it one afternoon, and it came the next day with normal shipping! Unbelievable! Then I just popped it in and replaced the covers I had removed and it was working again!

Parts Used:

Spring

George from Maceo, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

2 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the door handle was broken and the casing for the door was broken.

The part arrived with a couple of the small clips that hold the glass in place broken and a poor glue job. After I re glued the glass the installation was easy.

Parts Used: