Models > MH1150XMB0 > Instructions

MH1150XMB0 Whirlpool Microwave - Instructions

All installation instructions for MH1150XMB0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MH1150XMB0
46-60 of 187
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

bought microwave at Garage sale, but with no mount bracket

  • Customer: Jesus from Lincoln NE
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 8 of 20 people found this instruction helpful
I was able to buy the mounting bracket for a very cheap price and was able to instill it in my kitchen with ease.
Thank you

the original part had fallen off and broke when it hit the floor.

  • Customer: John from Los Angeles CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
Removed two screws to that held the old bracket. Installed new part and replaced the screws. Very simple. About 10 minutes. The part cost about $38.00. A repairman charged my neighbor 100 + dollars for the part and plus installation for the exact same thing. I highly recommend Partselect.

Vent grille was broken

  • Customer: Eugene from Tampa FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 5 people found this instruction helpful
Removed the two screws hlolding the old vent in place. Discarded the old vent. Snapped the new vent in place and attached with the two screws previously removed.

loose handle

  • Customer: David from Littleton CO
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required:
  • 5 of 11 people found this instruction helpful
This is not easy to do. I done it before to replace a broken window and it was a real bitch. I considered buying a new door rather then do it again.All I wanted to do was tighten two screws that hold the handle.
I used the advice found on your web site from a person who did it using quarters and putty knifes to remove the choke and the door insert. Sounded silly but it works like a charm. I advise anyone who needs to do this repair to use that info on your web site. It will save lots of frustration. Be sure to have plenty of quarters and a few pennies.

the door handle was broken and the casing for the door was broken.

  • Customer: Chris from Keller TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 15 of 42 people found this instruction helpful
The part arrived with a couple of the small clips that hold the glass in place broken and a poor glue job. After I re glued the glass the installation was easy.

Broken vent Grille (plastic tabs snapped)

  • Customer: Aaron from Trumbull CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
All you have to do is unscrew the clamps, remove the broken plastic pieces of tabs, fit the new grille into the slots on the bottom and put the two screws through the clamps at the top.

tabs broken off old vent

  • Customer: JOHN from DELRAY BEACH FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
took off old and replaced with new.
2 minutes mostly looking for stool to stand on to remove and replace screws.

Hood light wont work

  • Customer: Brandon from Vancouver WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 6 of 15 people found this instruction helpful
Turned power off. Removed all the screws from bottom removed socket and replaced

Replace the panel door

  • Customer: Lam from Anaheim CA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 2 of 4 people found this instruction helpful
Searched on the internet for repair assistance and found YouTube video that helped alot.
Need to provide installation directions in the product.

Broke rotating plate, it fell off counter after being washed

  • Customer: Lois P from Morris IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Opened door and put new plate in.

Placed order on Thursday evening and received Sat Am

part wasn't correct

  • Customer: Bob from Grand Rapids MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
The first part I had to send back because it wouldn't fit. You made it easy to return the wrong part. The replacement part also wasn't correct. I was able to modify it to work. Cut off the not needed tabs and screwed in. Thanks for having something that would work.

The grill broke when removing it to clean

  • Customer: Kathryn from Everett WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Unscrewed two screws, fit the grill into place and screwed in two screws.

the tabs for the screws completly crumbled

  • Customer: Kathleen from San Jose CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
I removed the two screws, removed the broken grill, popped in the new grill (after I ordered the correct color, did not get the biscuit color I thought I had ordered the first time) replaced the two screws....I was good to go. Strange that the tabs in the first place just fell apart...but reading others, find this seems to be a common problem. Simple as pie.

Had broken previous grille

  • Customer: Victoria from Mequon WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 1 of 2 people found this instruction helpful
The most difficult part was getting the old screw out of the top of the grille. Once that was accomplished, the rest was easy as can be. I would highly recommend your service - very good! Thank you!

cooking tray chipped

  • Customer: Nancy from Henderson NV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
replaced with new one
All Instructions for the MH1150XMB0
46-60 of 187