Models > MH1150XMB0 > Instructions

MH1150XMB0 Whirlpool Microwave - Instructions

All installation instructions for MH1150XMB0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MH1150XMB0
166-180 of 187
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broken grill vent

  • Customer: Dennis from Miamisburg OH
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
pop it in and used two screws, no problem.PS, this is a great company to deal with. I ordered wrong color and was replaced with proper part within three days.

Microwave turntable stopped rotating.

  • Customer: Larrt from Minooka IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
1. Unplug the power cord from the wall socket. 2. Remove the 10 screws holding the bottom cabinet cover in place. The bottom cabinet cover will swing down allowing acces to the inside ofe the microwave. 3. Remove the connector from the turntable motor. 4. Use a T15 Torx driver to remove the 2 Torx screws holding the motor in place. 5. Remove the motor. 6. Reverse the process using the new motor.

Replace Vent Grill

  • Customer: Samuel from Mitchellville MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed old grill and replaced new grill with no problem

replace light blub

  • Customer: roger from palm coast FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.

Broken grill mounting points.

  • Customer: Donna from Louisville KY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced the grill. Easy.

Glass cooking tray for microwave cracked.

  • Customer: Sharon from Kannapolis NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
All I had to do was lay the new tray in the microwave. Easy as pie. Also, the new tray arrived very quickly.

Broken plastic around screw holes.

  • Customer: Robert from De Pere WI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Make sure that the screws go in the holes, after you put the grill in place.

Broken handle (top of the handle actually broke off the screw)

  • Customer: Jennifer from Seymour TN
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
After taking the three screws out of the side of the door, I actually had to get help from my Dad who came over and was able to pry the top corner of the door out of the casing. I was afraid I was going to break the door. Once he got the door pried apart, I was able to replace the handle, clean the entire door and quickly snap it back into place and then replaced the screws.

The capacitor was melted in the microwave

  • Customer: Jocelyne from Fort Pierce FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with a fan.

Tabs broke off the old grille

  • Customer: Lynne from Raleigh NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed screws from microwave case. installed new grille. inserted screws into holes in case. Tightened screws to secure grille

Broke glass tray

  • Customer: Katherine from Cleveland TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Arrived in 24hours!!! Great.

Broken tabs on grill vent

  • Customer: Alice from St. Peters MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the old vent which had been taped in place, installed the new one, took less than five minutes to do the repair. Perfect fit. Also, I ordered the vent on Monday and it arrived on Tuesday. Fantastic!

vent plastic broken kept vent falling down on stove

  • Customer: Jesse from VICTORVILLE CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
remove old vent that was held in place by clips and two screws re-installed. Only problem is that should have ordered new clips was not aware that they did not come with the new vent

NONE

  • Customer: BRIAN from CLEARWATER FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
REMOVED THE TWO PHILIPS SCREWS INSTALLED NEW GRILL AND REPLACED THE SCREWS.

Needed to replace vent grille after breaking a little plastic ear that helped it stay in place.

  • Customer: Geneva from Waco TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Just be sure to push both sides of the grille into place and screws were easy to tighten. The filter is not difficult at all. Made me proud to repair it myself (73 yoa)
All Instructions for the MH1150XMB0
166-180 of 187