Make sure you haven't got the discount earlier.
Parts That Fix Maytag Range MGR6600FZ0 Door won’t close
Door won’t close is a commonly reported symptom for the MGR6600FZ0 Maytag Range, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your MGR6600FZ0 Maytag Range that will fix Door won’t close. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This is a door hinge active with spring, for your range. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, you may want to consider replacing this part. We recommend replacing both hinges at the same time. This model is roughly 9.5 inches long, f4 inches wide, and almost 1inch thick.
Customer Repair Stories
The door wouldn't close.
When I ordered the hinge it was recomended to replace both hinges. so I ordered two hinges not knowing that one of the hinges didn't have a spring. I ended up with an extra hinge.
-
Dorothy from PORT ST LUCIE, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
DOOR HINGE BROKEN, NOT SUPPORTING DOOR
Replace door, return locking clips to forward position, ... Read more check door for operation.
-
Charles from PAYETTE, ID
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Customer Repair Stories
Had lost one of the drawer glide
took about 5 minutes.
-
Lydia from SAN ANTONIO, TX
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins