Models > MGD5100DW1

MGD5100DW1 Whirlpool Dryer - Overview

Sections of the MGD5100DW1

[Viewing 1 of 1]
Diagram Diagram and Parts List for Whirlpool Dryer
Diagram
Keep searches simple, eg. "belt" or "pump".
Leveling Foot – Part Number: 49621
Leveling Foot
★★★★★
★★★★★
(13)
PartSelect #: PS1609293
Manufacturer #: 49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$11.40
  In Stock
LP GAS CON – Part Number: W11581317
LP GAS CON
★★★★★
★★★★★
(11)
PartSelect #: PS16875225
Manufacturer #: W11581317
This gas conversion kit is used to convert natural gas burners to liquid propane in dryers. If your dryer will not start, heat, or there is an unusual smell, replacing this part can be a solution to t...
$78.33
  In Stock
Stacking Kit – Part Number: 8541503
Stacking Kit
★★★★★
★★★★★
(6)
PartSelect #: PS888067
Manufacturer #: 8541503
This kit comes with 2 adhesive pads, 2 brackets and 4 screws. This is for stacking the appliances vertically - dryer over washer.
$51.84
  In Stock
Drying Rack – Part Number: 3406839
Drying Rack
★★★★★
★★★★★
(6)
PartSelect #: PS346849
Manufacturer #: 3406839
This dryer drying rack is great for drying shoes and other items that cannot tumble dry. This dryer rack fits dryers that are 29 inches wide, have the letter "E" following the numbers in the model num...
$71.44
  In Stock
Door Glass Seal – Part Number: W11126230
Door Glass Seal
★★★★★
★★★★★
(4)
PartSelect #: PS12114459
Manufacturer #: W11126230
This is a dryer door seal, which ensures that the glass of the dryer door and its frame seal the contents of the dryer drum from your home. If you can feel warm air coming from the dryer door during t...
$71.75
  In Stock
Side and Bottom Vent Kit – Part Number: W10470674
Side and Bottom Vent Kit
★★★★★
★★★★★
(2)
PartSelect #: PS3633049
Manufacturer #: W10470674
This kit is used for the bottom and side exhaust. The kit includes both the straight and elbow vent.
$107.13
  In Stock
Retainer-Idler 1/4-20 x 1/16 – Part Number: WP3389420
Retainer-Idler 1/4-20 x 1/16
★★★★★
★★★★★
(1)
PartSelect #: PS11741432
Manufacturer #: WP3389420
Sold individually.
$7.76
  In Stock
RACK-DRY – Part Number: 8212450A
RACK-DRY
★★★★★
★★★★★
(1)
PartSelect #: PS1487158
Manufacturer #: 8212450A
$74.90
  In Stock
Stacking Kit – Part Number: 8572546
Stacking Kit
★★★★★
★★★★★
(2)
PartSelect #: PS990537
Manufacturer #: 8572546
This kit allows you to stack your washer and dryer to maximize your laundry space.
$48.18
  In Stock
STACK KIT FOR LONG VENT DRYER – Part Number: W10869845
STACK KIT FOR LONG VENT DRYER
★★★★★
★★★★★
(1)
PartSelect #: PS12069913
Manufacturer #: W10869845
$62.53
  In Stock
Drying Rack – Part Number: W10322470A
Drying Rack
★★★★★
★★★★★
(1)
PartSelect #: PS3407918
Manufacturer #: W10322470A
This Dryer Drying Rack attaches to the inside of the dryer drum and remains stationary as the dryer turns so you can dry shoes, sweaters and other items that shouldn't be tumbled. This accessory can b...
$41.59
  In Stock
Wiring Harness – Part Number: WPW10298258
Wiring Harness
PartSelect #: PS11752344
Manufacturer #: WPW10298258
$6.50
  In Stock
View More
Back to Top

Questions And Answers for MGD5100DW1

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the MGD5100DW1

[Viewing 1 of 1]
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Back to Top
Replacing the Leveling Foot

Replacing the Leveling Foot

Replacing the Leveling Foot

Replacing the Leveling Foot

View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
converting to LP gas
First I removed the front panel which allowed access to the burner assembly. Then I removed the gas connector and elbow from the back of the dryer. Then I removed 2 screws that hold burner assembly in place and 2 screws that hold an angle brace for the burner assembly. Had to loosen the screw that clamps around the gas pipe holding it in place clear in the back inside dryer housing. Unplugged all wiring connectors, then I removed the burner assembly and removed the 2 screws holding the burner tube to the valve. Remove the orifice and replaced with the proper size for LP gas. Then removed the blocking pin and replaced with one for LP gas. Then reassembled in reverse order. Actually pretty easy.
Read less
Parts Used:
LP GAS CON
  • Robert from Tenino, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set, Wrench (Adjustable)
30 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to change rear exhaust to the side to fit dryer into my closet.
First, I opened up the front of the dryer and then unscrewed the entire back piece. I assembled the new exhaust piece from the kit. Next, I took out the old straight rear exhaust and then replaced it with the elbow shaped left eshaust from the kit. Lastly, reattache the back and front pieces of the dryer.
Parts Used:
Side and Bottom Vent Kit
  • Mark from San Diego, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
43 of 90 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Placing Dryer on Top of Washing Machine with Stack Kit
I purchased a stack kit from "Part select.com". The item was just what I needed to do the job. The delivery of the part was made the next morning. WOW! Excellent service! The process was completed in less than 24 hours, start to finish. Very impressed!
Parts Used:
Stacking Kit
  • Randy from Brentwood, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
25 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top