Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MFI2568AEW12 > Instructions

MFI2568AEW12 Maytag Refrigerator - Instructions

All installation instructions for MFI2568AEW12 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MFI2568AEW12
511-525 of 561
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Compressor would not run.

  • Customer: Dennis from Grant, NE
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The repair was simple. It was a matter of unpluging the old relay and then pluging in the new one. I almost bought a new refrigerator but after doing alittle reading on this web sight and finding out the most common reason for having the problem I was having I decided to order the relay. It was the problem...$ 70.00 -v- $1400.00. I'm HAPPY !

deli drawer broken hinge

  • Customer: Bernadette from Moore, OK
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Socket set
  • 0 of 0 people found this instruction helpful
Was very easy after I found right tool to get out the screws. There were only 3 popped old one out and put new one in. I waited over a year thinking this was a difficult/expensive repair. So not true...22$ and 15 min. I will definitely recommend this store/site and maintain it for my future use.

Interior of door handle worked loose

  • Customer: Michelle from Willmington, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Easy to screw on. Took less than 5 minutes.

vegatable drawer wouldn't open

  • Customer: Joseph from Medford, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
had to replace side cap s because plastic pin sheared off

Replace the left side panel of the pantry draw.

  • Customer: Gaynell from Baton Rouge, LA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I first reviewed the video, paying attend to the order in which items were removed and put back in place. On the video, I noticed that the lid to the draw was put back into place before the draw. Following these instructions, the repair went extremely easy and fast. I would recommend reviewing the video first.

replaced oven lightbulb

  • Customer: peggy ann from forest city, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
very easy

Pivot Block not operating french door hinge

  • Customer: James from Merced, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
The pivot block looked slightly worn because the hinge door mechanism on the left door would not "close" when the door was opened. I bought the pivot block, but the fix is adjusting the dual french doors so they are even i n height at the top of the unit. Pivot block is a 2 minute job with screwdriver. Adjusting the height is a 5 minute job with nut driver.

Tab that holds pop-up drawer front broke off

  • Customer: Nathaniel from Chesterfield, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Simply remove the two fruit/vegie drawer and the glass pantry top. Lift off the front support for the glass. Using a nut driver, remove the 2 screws that hold the pantry cap onto the side of the fridge then remove the end cap and temperature control. Remove the two screws that hold the drawer slide to the end cap and transfer to the new end cap. Now transfer the temperature control slides from the old end cap to the new. Some twisting and bending of the plastic slides will be necessary so be carefull not to push too far and break them. Reverse the removal until everything's back together.

nipple holding draw lidto pantry end cap broken off

  • Customer: mahlon from Springfield, MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Remove screws holding pantry end cap to refrigerator and sliding bracket from pantry end cap, which holds deli draw in place. Remove plastic hardware from old to new, then replace screws in reverse order of there removal.

left side pantry cap pin broke shortly after purcahse.

  • Customer: carol from beverly hills, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
very easy, my reading the reviews i knew exactly how to do it, and it really didnt take 15 minutes. hardest was taking all the shelves out, but i had that all done ahead of time. as the part came very fast. perfect job and i did it not my husband. great company. i will diffently order from you again carol in beverly hills fl

plastic tab right side for pantry lid broken

  • Customer: Robert from Homer Glen, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 0 of 0 people found this instruction helpful
remove old replace with new part easy as that no brainer

Center rail was broken

  • Customer: Paula from Pocatello, ID
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
After removing the glass shelf I simply removed the broken center rail and popped in the new one. It took only a couple of minutes from start to finish.

Crisper slider and Pantry end cap broke

  • Customer: Robert from Pewaukee, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Ordered parts. They were here in 1 day. Followed directions on internet. Crisper slider took 10 seconds to replace after removing crispers and cover glass. The pantry end cap was replaced exactly as shown on the web site and took less than 5 minutes. Be careful putting cover back on the end cap because you do not want to snap the nib again.

LED Lights flashing on front and fan not running and ice dispenser door flopping uncontrolablly

  • Customer: Lloyd from Whitefish, MT
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I downloaded a troubleshooting manuel and went through the diagnostics. All tests checked normal except the Ref. circulating fan, there is a high speed test with voltage check and a low speed test with voltage check. The voltage was out of range for both tests which lead me to the high voltage control board as the problem. I ordered a Ref. circ. fan just to have because it is such a crucial device for the proper operation of the appliance.

One of the pins holding the door to the Chef's Pantry door broke

  • Customer: Gordon from Bellevue, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Socket set
  • 0 of 0 people found this instruction helpful
Pins holding the door in place are part of the plastic end cap on either side of pantry drawer. Very easy to replace. Need only to remove two bolts holding the broken end cap in place, remove the drawer slide from that piece by removing two more bolts, reinstalling the drawer slide on the replacement end cap, and reinstalling the new end cap. Part was surprisingly cheap and arrived much sooner than indicated.
All Instructions for the MFI2568AEW12
511-525 of 561