MFI2568AEW12 Maytag Refrigerator - Instructions

removed the old filter. unwrapped the new one. peeled off the protective foil. inserted new filter as directed. placed old filter in sink to drain. ran "water" from dispenser to purge air from line. Shazam!

It took one minute to put the shelf in. The best part was the speed with which the part arrived. I also want to compliment the operator I dealt with. She was very helpful.

Removed crisper drawers and the crisper frame. Then removed the glass shelf from the frame and also the plastic front piece and the metal rod that adds stability to the frame. Those last two items required a screw driver and pliers. Inserted the metal bar into the new frame, popped on the front piece, and installed frame in frig. Put in center rail, then glass top, and then put in crisper drawers.

The repair was straight-forward once the pantry drawer and lower shelves were emptied and removed - remove the mounting screws, replace the broken end cap with the new part. It took me several minutes to reattach everything. It took me longer to clean up all the old food spills under the pantry drawer.

20 seconds. Easy Easy.

Removed the old bar. Replaced the part that moved the shutter open and closed. Installed the new parts. Put the drawer lid back in place. Working fine. Thanks!!

I used the feedback information from others who commented on your website

Opened up the compartment where the old filter was located, twisted it to take it out (be careful not to spill water in the filter!), and installed the new one. Even a 64 year old woman had no trouble!

replaced electric control board, defrost for six hours. next day (24 hours) same problem, dusterhoff2928@charter.net

Similar to other reports. Only thing I can add is the nut driver is 1/4" and it is all I needed to remove and replace all five screws.

The annoying cover to the deli drawer broke off again. This is my second time purchasing this part from this website (left side and now, right side). Both purchases were very easy. Replacing the left side is easier because there isn't a temperature adjuster to remove and reinstall. I found this website very easy to find my parts both times, and I installed the right side (the latest fix) in less than 15 mintues while taking care of two kids. Many women do repairs around the house and are successful! :)

Super easy. 1) Remove beer from the bottom the glass shelf. 2) Remove the glass shelf. 3) Remove the broken Center Rail. 4) Replace the Center Rail. 4) Clean and replace the glass shelf then the beer (keep one bottle for consumption). ** NOTE: PartSelect was very simple to navigate and identify the correct part needed. Shipped/Received in a couple of days. The part was correct. Couldn't have been easier.

The repair is staightforward. Simply remove the deli drawer (up and out), the glass lid, and the vegatable drawers above it (easier access- they just slide out). Using a 1/4 socket I removed the 3 screws holding the end cap in place. You then disconnect the 2-3 places where the end cap connects to the humidity adjustment (front and rear). When the end cap is out you have to remove the drawer slide as and humidity adjustment slide as it isn't included in the replacement part- just 3 more screws- same size). Attach the drawer slide to the new end cap and do everything in reverse to replace it. Took all of 20 minutes including cleaning/drying the drawers etc while I had them out. Easy project.

Replaced the water filter with the bypass plug. The water in western NC is perfect out of the faucet.

Followed your internet instructions. Saved $1200!!