Models > MFI2568AEB Maytag > Instructions

MFI2568AEB Maytag Refrigerator - Instructions

All installation instructions for MFI2568AEB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MFI2568AEB
541-545 of 545
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Meat drawer cover hinge broke

  • Customer: Robert from Kingsport TN
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The nipple on the "Pantry End Cap - Left Side" that acted as part of the hinge for the meat drawer cover broke off. After receiving the replacement Pantry End Cap, I removed the meat drawer, removed the 2 vegetable bins, removed the glass shelf above the meat drawer, removed the screws holding the old Pantry End Cap, and pulled the old Cap out. Then I put the new Cap in place, screwed it in, and replaced everything else. The most surprising part of all of this is that I ordered my part on 4/22 and received and installed it on 4/25; 3 days! Thank you PartSelect for your fast response.

Cleaning glass and shattered into a million pieces

  • Customer: Eric D from Sheridan IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Found glass here and ordered. Had it 2 days later and set new glass in and back in business.

center rail which supports 2 crisper drawersThe rail needs to be lined up with the drawers

  • Customer: Mary from Riverside CA
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The rail & the drawers need to be aligned with each other & then push the rail into the little hole in the back wall of the frig while sliding the drawers in at the same time. I think I put too much fruit & vegs in the drawers which makes them heavy & the little tab which is there to support the drawers has broken off twice. This is the 2nd time I have ordered this rail. It would be helpful if the rail had a vertical supporting post towards the front. I like to have a lot of produce on hand all the time

Cover to bottom bin would not stay secured. broken plastic support pin

  • Customer: RAY from HOUSTON TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
Removed Left side support with broken pin (3 small hex head bolts). Replaced with new support with pin in place. Note behind: I broke the pin trying to replace the cover. Now I know to flex back the side to the cover, and not flex the pin which broke. This cost me 25 bucks and one hour, saving me from a probable $300 dollar charge. THANKS, PARTS SELECT!!!!!

Front ice maker display flashing and ice maker door flapping open and closed.

  • Customer: John from Fillmore CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
1. Unplugged refrigerator

2. Removed rear silver stainless steel panel on the right rear side of the refrigerator (if you are standing in front of the unit) using a small socket set. The panel is vertically located in center at the rear of the refrigerator.

4. Removed plastic cover over the HV controller board.

5. Unplugged 4 molex connectors attached to the board and carefully pushed on the plastic release locks that hold the board in place as not to break them and removed the HV controller board.

6. Inerted the new HV controller board and plugged in the molex connectors. All molex connectors are of unique size and will only attach to the HV controller board in one location.

7. Replaced plastic cover over HV controller board and attached stainless steel panel with a small socket set.

8. Plugged in the refrigerator.

9. Identified programming code inside the refrigerator.

10. Followed included instructions to enter program code to activate refrigerator front panel.
All Instructions for the MFI2568AEB
541-545 of 545