Models > MFI2568AEB Maytag > Instructions

MFI2568AEB Maytag Refrigerator - Instructions

All installation instructions for MFI2568AEB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MFI2568AEB
406-420 of 573
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

water filter 1 year old. Light bulb burned out.

  • Customer: Chuck from Harbor Beach MI
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Unscrewed old water filter. Screwed in new filtr. Moved lense off track. unscrewed bulb. Screwed bulb. Slid lense back in.

leaking at tube where water filter is

  • Customer: Jodi from St. Clair Shores MI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
you snap out old part pull waterline out of tube going down to the back and unplug tube on top connection ,,that was tricky ,,revirce for new part but you guy should make the water tube attachment on the water line match what is out there that you buy at the stores .I had to go back 3 times to get the right part to get my water line to connect with yours ..

center rail for vegetable and fruit drawer was broken

  • Customer: Mary from St.Charles MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed both drawers and glass shelf just above the drawers. Center rail just fit into place. Replaced glass shelf and both drawers. Took no more than 5 minutes.

THE CENTER RAIL WAS CRACKED AND THE SHELF RAIL ALSO HAD A CRACK IN IT

  • Customer: Anna from Worchester MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
THE REPAIR WAS VERY EASY .. THERE WAS NO TOOLS REQUIRED.THE SHELF RAIL JUST SNAPPED IN AND OUT VERY EASY

Broken rail

  • Customer: Joseph from Mountain top PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I replaced the broken part. There was one bolt to loosen with a nut driver. I disconnected the original wiring harness, reattached the new harness and reinstalled the hinges, which simply slide into place. Then I reinstalled the small bolt I had removed with the nut driver. The job was with no problems.

door slamed and broke the two pins on deli tray end caps

  • Customer: james from lake worth FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
broke pins wed. morning ordered end caps wed. afternoon parts arrived next morning at 9:30 had it fixed by 11:30 30min repair time and i'mm 77years old. Out standing service. Removed veg. trays removed glass above deli tray removed broken pantry end caps installed new end caps two screws each.Very easy,took less than 30 min. Thanks

Broken tab on right side of meat/cheese lid

  • Customer: James from Dewitt MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
1.remove upper cold storage bins 2.rremove top glass on lower storage meat/cheese bin. 3.remove trim parts from front and rear 4. remove bin 5. remove trim pieces and slider mechanism from right side and back. 6. replace with new parts. 7. clean out gunk which accumulated on bottom of fridge. 8. reassemble in reverse order 9. Took longer than anticipated...over one hour.

Moved into a new apartment and this part was missing from the refrigerator so the bottom crisper was not functional.

  • Customer: Linda from Biscayne Park FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Was a very tight fitting part and it had to be gently tapped into place.

CENTER RAIL END TAP SNAPPED OFF, AND CRISPER DRAWER BROKE HINGE TAB

  • Customer: William from Ridgely MD
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
REMOVED BOTH VEGGIE CRISPER AND LOWER CENTER CRISPER, REMOVED GLASS SHELVES, REMOVED BROKEN SIDE PANTRY END CAP TWO SCREW, TWO WERE MISSING. HARDEST PART WAS TO REMOVE THE REAR ADJUSTABLE PIECE AND INSTALL ON NEW END CAP. GLAD I TOOK MY TIME AS THE CENTER RAIL WILL PROBABLY HAVE TO BE REPLACED AGAIN. POOR DESIGN, NUMEROUS OTHER COMMENTS SAY THE SAME THING. BEST PART OF THE REPAIR WAS ORDERING FROM PARTSELECT.CO, SHIPPED ON TIME AND ORDERING WAS EASY WITH COMPLETE PARTS DIAGRAMS.

Broken tab holding the bottom drawer cover in place

  • Customer: Richard from Naperville IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the drawers and glass. Removed two screws holding the end cap in place. Reversed process for new piece. Really really simple. Don't pay somebody else to do this.

peg to flip lid to drawer broke

  • Customer: brett from arvada CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
biggest time was the cleaning of the area ;-) for the actual work it was less than 10 mins to replace. remove the three screws and there are two tabs on the back of the replacement part that you need to line up with the slots in the back and it simply snaps in place - put the screws back and you're done

broken hinge pin for deli drawer cover

  • Customer: Robert from Minneapolis MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I followed instructions provided by others on this page. I can't believe how easy it was.

Hinge joint separated from lid

  • Customer: Marcia from Ridgecrest CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Found "pegs" either side of drawer found "holes on side of lid pushed holes on side of lid onto pegs.

left side pin broken on pantry end cap

  • Customer: Terry from Anaconda MT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed all plastic drawers and glass shelf. removed two screws holding the part to the side. Removed the slider metal part and placed it on the new part. Reversed the process, project complete.

Broken plastic dowel

  • Customer: Jerry from LA CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I unscrewed three screws and took off broken side. Then I unscrewed three screws and removed and replaced drawer slider. I then replaced old side with the new one.Thanks you for making this so easy.
All Instructions for the MFI2568AEB
406-420 of 573