MFD2560HES Maytag Refrigerator - Instructions

unplug power! Remove the screws from lower panel on back of refrigerator. Lift wire mount out of back panel. Capacitor is mounted directly to the relay and overload switch located on the left side of the compressor. Remove the spring clip holding the capacitor in place and pull the old capacitor out. Plug in new capacitor and replace spring clip. Use vacuum to remove dust from drip pan and wipe fan blades clean. Replace wire into slot on back panel and replace screws. Remove front coil cover below freezer door. vacuum dust off coils and replace cover. Plug refrigerator in and enjoy cold beverages. Relay and overload kit were not required for this repair.

As others have described. Went very smoothly

Found water line in was leaking as well- all in all great repair video explained well and now in have filtered water and ice! Wife thinks I'm a hero

Nutdriver....removed crispers.......pulled drawer. While drawer slide pulled out...removed 1 screw. Removed second screw. After looking at new on I understood had to pull up a bit while removing to clear taps at front and back.I am a handy kinda fella that fixes everything tho"

took off the old part and replaced with new using some parts from the old ice maker. We had to make one new screw hole because the new ice maker didn't match up with the old holes. Easy installation took 30min.

I followed the instructions shown on the YouTube video on the Parts Select site. I had to make a few modifications. There were two nuts that had to be loosened to lift the ice maker off the freezer wall. The mounting bracket had to be transferred from the old icemaker to the new one to align with the hole in the freezer to reattach. The white wire went under the clip was a black wire but it was easily recognized. Other than that it was very straight forward and I had new ice in a few hours. I would definitely do it again.

I popped the broken panel out and installed the replacement.

Ordered new part received it quick. Removed two nuts to remove old pantry side. remove drawer slide from old part and replace on new part. Re-attach pantry end cap. replace glass and brackets reinstall drawer? Done! really simple. Instructions on web site and with new part.

The repair was very straight-forward with using a socket set to remove the side panel and replace it. This also gave be a chance to give the refrig a good cleaning:) I was a bit worried about "popping" the cover in place, but it went in smoothly. I have decided that one of the causes of the breakage was lifting the cover manually and not allowing it to open automatically as the veggie drawer was opened. Hopefully, this will prevent future issues. I'm SO glad I found your site and will definitely use it again and refer friends!

Placed in window and pulled out sliders.

I pulled the frige out, took off the cover from the bottom with a nut driver. Took off the safety clip then pulled the plug out from the relay then the relay came out. Replaced the part and reinstalled the same way. This was really easy and fast.

I wasn't sure about the part I needed so I called the service number, they help me decide on the correct parts for my unit. This was the easiest repair I've ever done. One hex head screw and one clip in electrical connection and we were done. It took less than 5 minutes and now it works like new, no more leaking water and plenty of ice.

used the directions from PartSelect

simply repalced

I snapped the cover plate to the filter open. Pulled the filter down and twisted counter clock wise to take filter out. I installed the new filter in by inserting the filter and tuning clock wise to secure the filter. I flushed the water for about two minutes and then allowed it to be put back into service.