Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MEW6627BAB

MEW6627BAB Maytag Wall Oven - Overview

Get Parts and Repair Help for MEW6627BAB

If you know the wall oven repair part you need, you can browse the list of all parts on the MEW6627BAB, or you can search by name or part description. You can also find your part by where it is located on the MEW6627BAB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for MEW6627BAB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 3 hrs and your part ships today!
$28.90

Long Oven Sensor

This oven sensor kit comes with two harness adapters. This sensor detects the temperature within the oven cavity.

Order within the next 3 hrs and your part ships today!
$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

Order within the next 3 hrs and your part ships today!
$21.68

2 Piece Broiler Pan

The top of this part is now black.

Order within the next 3 hrs and your part ships today!
$52.72

Bake Element

This bake element is found on the bottom of the oven.

Order within the next 3 hrs and your part ships today!
$6.28

Screw (4)

Sold Individually.

Order within the next 3 hrs and your part ships today!
$40.19

Oven Rack

Sold individually.

Order within the next 3 hrs and your part ships today!
$2.76

Screw

Order within the next 3 hrs and your part ships today!
$24.71

Light Cover Lens

This part goes over top of the light bulb.

Order within the next 3 hrs and your part ships today!
$61.05

Broil Element

This broil element is found on the roof of the oven.

Order within the next 3 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven not holding 350 F, when cooling the coils did not reheat

  • Customer: David from Westford, MA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 112 of 130 people found this instruction helpful
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. ... read more

F1-1 code

  • Customer: charles from marstons mills, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 48 of 62 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the sensor out about 3 inches and disconnected the two wires. Next, I connected new sensor and screwed the new sensor back in place. One area for caution. Make sure that the electrical connection is pushed in past the insulation on the back side of the oven. Failure to do so will ... read more

Dim display

  • Customer: Gregory from Ann Arbor, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 24 of 26 people found this instruction helpful
This is a Jenn-Air double oven. Turned off circuit breaker to the oven. Removed 7 screws that hold the top panel in place. Removed 3 cable/connectors from the clock module so panel can be removed from oven and placed on a table. Unscrew 4 hex head screws attaching clock module to front panel. Press on two tabs and remove circuit board from plastic frame.... read more