Models > MDH25TF1

MDH25TF1 Frigidaire Dehumidifier - Overview

Get Parts and Repair Help for MDH25TF1

If you know the dehumidifier repair part you need, you can browse the list of all parts on the MDH25TF1, or you can search by name or part description. You can also find your part by where it is located on the MDH25TF1 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the MDH25TF1 [Viewing 2 of 2]

$29.18

Float

$84.07

Humidistat Control

This control needs to be replaced if the dehumidifier won't shut off.

$23.68

Auto Shut Off Switch

$0.73

LENS

KNOB-CONTROL

Water Container Reservoir

This container no longer includes the float. Must order float separately.

Fan Motor

$2.55

SCREW

$87.71

THERMOSTAT DEFROST

$41.50

FAN BLADE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

This dehumidifier is the best we have ever had but the water reservoir container split and the float broke off.

  • Customer: Shelah from Grove City OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 8 of 11 people found this instruction helpful
Never dreaming I could find a replacement, I went searching on the internet anyway and found the model which had been discontinued however the container and float were still available. It took two minutes to put the new float in and the reservoir container on the unit. It works great!!! read more

fan motor had froze up (not turning)

  • Customer: James from Floyds Knobs IN
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench(Adjustable)
  • 4 of 7 people found this instruction helpful
Took unit outside
removed the covers
cleaned dust and lint out with high pressure air
removed motor and tryed to repair it
when this didnt work I took it in to my desk and ordered a new motor on-line, this was at 2:30
the next day at 10;30 the new motor arrived via UPS. I installed it and the unit has run fine ever since. read more

Unit would run continuously and not shut off

  • Customer: Jonathan from New Oxford PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 4 people found this instruction helpful
Removed the front cover and then the humidistat from the bracket. Two push on wire connectors and then reversed. Very straightforward and excellent part matching. Given the prices for new dehumidifiers it was great to breathe life back into this unit which does its job well. Thanks for the easy to use web site and fast fast service! read more