Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDG9206AWW

MDG9206AWW Maytag Dryer - Overview

Get Parts and Repair Help for MDG9206AWW

If you know the dryer repair part you need, you can browse the list of all parts on the MDG9206AWW, or you can search by name or part description. You can also find your part by where it is located on the MDG9206AWW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for MDG9206AWW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.85

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

$15.40

'M' Series New Style Coil Kit

This gas dryer ignition coil set comes with two ignition coils: one three terminal Boost/Hold coil, and one two terminal secondary coil. Usually only one of them burns out but you should replace them as a set. Both have to be operational for the gas valve to open.

$14.68

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit -...

$14.74

Multi Rib Belt - 91-5/8"

At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.

$6.20

Roller Shaft

This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.

$10.22

Idler Pulley Wheel and Bearing

This idler pulley wheel is white and made of plastic. It is two inches in diameter and comes with a center bearing.

$16.12

Flat Style Igniter

This flat style igniter comes with a wire harness connector. This part ignites the gas within the dryer. Bracket is NOT included.

$33.69

Lint Filter

This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and three quarter inches wide. This is a white filter and the screen is made of white nylon mesh.

$27.70

Radiant Flame Sensor

This part senses the flame for heat allowing the gas valve to open.This flame sensor is three inches long and is used for many gas clothes dryers.This flame sensor assembly is made...

$15.38

Timer Dial Skirt

This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lint into venting area.

  • Customer: Anthony from DeKalb, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 483 of 494 people found this instruction helpful
Removal of old lint collector and replace with new one. read more

dryer squeeking

  • Customer: gerald from park city, MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 447 of 467 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

The old lint screen had a couple tears in it

  • Customer: Ron from Monte Vista, CO
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 371 of 375 people found this instruction helpful
No problem at all, just took out the old one in front and slid in the new one. read more