Models > MDE7400AYW > Instructions

MDE7400AYW Maytag Dryer - Instructions

All installation instructions for MDE7400AYW parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dryer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MDE7400AYW
436-450 of 549
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The dryer would make a loud squeal as it started.

  • Customer: Terry from Concord GA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I followed the videos. I'm not mechanically inclined and had to watch one video three times AFTER I started but I took my time and actually enjoyed it. I thought the problem was the belt but now I believe it was a drum support roller that was failing causing the belt to slip due to the extra load the hard to turn roller caused. I am now a big fan of Part Select as they have really "done it right!"

making a loud squealing noise

  • Customer: george from warren ME
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
I replaced adler pulley and belt. the bearing in pulley was gone . I replaced belt as preventer maintance. the job went real well. I was impresed with the time I received the parts.I put the order on Thursday night and received the parts saturday around noon. great job thanks George PS they even send vido how to replace parts.

loud squek

  • Customer: D.Harold from Hayesville NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I watched the vidio but after begining the repair,I realized that the drum roller could be replaced without removing the tumbling drum. This made the replacement go even faster & easier. Great website. Great vidio. I'll be back,given the age of this dryer.

WORN OUT BROKEN DOOR LATCH

  • Customer: chuck from odessa TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I would like to say first of all that i was amaized and pleased at how simple the ordering of this part was and while looking at the parts diagram on you website i noticed the door swing was optional and could be easily changed and the dryer came from the factory with a latch installed on both sides of the door. In our laundry room the dryer sits to the left of the washer and the door to the dryer opened to the right which has always been a slight inconvenience... so instead of changing out the broken part, i took the door and hinge off with my cordless screwdriver (6-8 screws) and turned it around and remounted it on the opposite side... SIMPLE! I never took the new part out of the UPS envelope. Now i have a spare so i taped the new part in the envelope to the back of the dryer in case i ever need it and now we have more convenience with the door swinging the correct way. Sweet deal! took less than an hour. Thank you for making this task simple. Chuck G.

Drum Support Roller failing & binding (noisily) on its shaft

  • Customer: David from Kennebunkport ME
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Followed the repair steps provided in the PartSelect video for the dryer! Piece-of-Cake! Trickiest step is reattaching the belt to the idler wheel (blind), but with analysis of how it goes before the drum is reinstalled, it can be done straightforwardly. Happy repairs!

high pitch squeeking

  • Customer: Jim from Chesapeake VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
removed front of dryer, release belt tension, remove drum, remove old drum rollers, snap ring pliers a must, install new rollers and reassemble dryer.

dryer noise

  • Customer: John from Shoreham NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
The web site video was extremely helpful and parts suggestion based upon symptoms prove as well very helpful. Your web site is an excellent source for future repair issues

Roller glides for drum went bad

  • Customer: William from Markham IL
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers, Socket set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
After watching the video to repair the glides my son and I began the process. After making the repairs and putting the dryer back together the drum would not turn. I told my son it had to be a bad belt He claimed it was not. After taking the dryer drum off we found the belt to be very brittle and worn. After calling around a shop that sold the part was found. Replacement was made and the dryer now runs like brand new. Thanks.

squeals like a banshee

  • Customer: Steven from Irving TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
this was the second maytag dryer i've had this problem with. the idler pulley on belt tensioner is 99% culprit. u gotta take dryer apart from the front,and while u in there use external snap ring pliers to remove drum rollers (2)n lube w/high temp grease.not for faint of heart,or peeps with no mechanical inclination. good luck

rear roller drum and shaft broken

  • Customer: Bill from Midlothian VA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Followed instructions on the you tube video included in the part selection of the PartSelect part ordering webpage. The video described replacing the drum roller and shaft, as well the dryer cabinet / drum belt / etc. removal to access the broken parts on my exact dryer. Individual parts were less expensive on other websites, and I could find the you tube independently, however, the instructions included from PartSelect, quick delivery and professional service from Part Select were worth the difference ! My first experience with PartSelect, but not my last.

short baffle became unattached to drum and there was another short baflle broken

  • Customer: Lorenzo from Pembroke Pines FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
after watching the repair video on your website I just followed the instructions. It was real easy.I re-attached one baffle, installed a new baffle and tightened the screws of the third baffle.

I now have stripper sheetmetal screws

  • Customer: David from Kelsey CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I did the repair has the video showed me.

Dryer eating clothes!

  • Customer: Larry from Mooresboro NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I followed video, took out two screws from bottem front of dryer. removed door set a side, used a nut driver to remove the 4 nuts holding the front drum panel, I used a 1/8 drill to remove 4 pop-rivets holding what use to be front glides,I put the new glides in cork parts first then the plastic parts, than used my poprivet gun to but in the new rivets. I put it all back together and now no more holes in my underwear!!!

Squeaky drum roller.

  • Customer: Robert from Spring Hill FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
First I took the front of the dryer off and removed the drum (of course, after disconnecting the power supply) Removed the belt and then the roller itself. I had to open a removable port on the back side to reinstall the belt but that was also very easy. The videos made it all seem soooo simple. Thank you.

Filter torn

  • Customer: Sovola L. from Alleyton TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took out the old filter and dropped in the new one
All Instructions for the MDE7400AYW
436-450 of 549