Models > MDE16PRAZW

MDE16PRAZW Maytag Dryer - Overview

Get Parts and Repair Help for MDE16PRAZW

If you know the dryer repair part you need, you can browse the list of all parts on the MDE16PRAZW, or you can search by name or part description. You can also find your part by where it is located on the MDE16PRAZW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for MDE16PRAZW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$20.12

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

$5.30

Roller Shaft

This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.

$12.76

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit -...

$18.16

Multi-Rib Belt

At 91-5/8" long, this dryer drum belt has 5 ridges and is 3/8" wide.

$8.80

Idler Pulley Wheel and Bearing

This wheel spins on the pulley shaft.

$2.70

Retaining Ring

$2.70

Drum Roller Shaft Washer

This part is sold individually.

$3.96

Idler Shaft Washer

This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color. Sold individually.

$8.56

Drum Felt Seal

This seal can be used for the front or rear drum. Adhesive is NOT included.

$12.38

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

dryer squeeking

  • Customer: gerald from park city MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 394 of 402 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

Motor buzzed and dryer drum would not spin when pressing start

  • Customer: Frederick W. from Austin TX
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 129 of 199 people found this instruction helpful
From the first time the motor buzzed (but dryer tumbler then started to turn), 2 weeks elapsed for the dryer drum to stop turning altogether. If this occurs, DO NOT continue to push the start button because the motor armature wiring will heat up and the insulation will begin to melt and smell - a SAFETY HAZARD. Unplug dryer and lockout/tagout as appropriat... read more

catch mounted on door broke

  • Customer: Paul from Mt. Pleasant SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 45 of 58 people found this instruction helpful
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in. read more