Models > MDE16PDDYW > Parts

MDE16PDDYW Maytag Dryer - Parts

All parts for the Maytag Dryer MDE16PDDYW

Below is a list of all parts for the Maytag Dryer MDE16PDDYW - LAUNDRY (DRYER ELE). To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the MDE16PDDYW
1-14 of 146
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$19.73

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

$5.00

Roller Shaft

This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.

$12.51

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit -...

$17.81

Multi-Rib Belt

At 91-5/8" long, this dryer drum belt has 5 ridges and is 3/8" wide.

$8.80

Idler Pulley Wheel and Bearing

This wheel spins on the pulley shaft.

$2.70

Retaining Ring

$2.70

Drum Roller Shaft Washer

This part is sold individually.

$3.96

Idler Shaft Washer

This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color. Sold individually.

$8.07

Drum Felt Seal

This seal can be used for the front or rear drum. Adhesive is NOT included.

$19.47

Tall Baffle

This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle.

$12.38

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$12.05

Door Switch Kit

This part replaces older two terminal switches.

$21.21

Short Baffle

This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle.

$26.97

High Limit Thermostat

This high limit/safety thermostat is used to prevent overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 200 degrees Fahrenheit. The element will kick back in when the temperature drops to 170 degrees Fahrenheit. Differential of 30 degrees.

All Parts for the MDE16PDDYW
1-14 of 146