Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDE16PDCZW

MDE16PDCZW Maytag Dryer - Overview

Get Parts and Repair Help for MDE16PDCZW

If you know the dryer repair part you need, you can browse the list of all parts on the MDE16PDCZW, or you can search by name or part description. You can also find your part by where it is located on the MDE16PDCZW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for MDE16PDCZW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.85

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

$10.18

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit - purchase locally.

$18.75

Door Switch Kit

This part replaces older two terminal switches.

$16.63

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$22.44

Blower Wheel

This blower wheel does not come with a spring clamp, but it does have twenty fins and it is designed to fit a 3/8 of an inch motor shaft.

$137.39

Drive Motor - 115V

This part has a D-shaped motor shaft and this motor runs at 1/4 horsepower and carries 4.5 amps.

$4.12

Idler Spring with Rubber Dampener

$4.94

SCREW

$4.79

Leveling Leg

$10.25

Screw & Fastener Kit - Front Panel

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

dryer squeeking

  • Customer: gerald from park city, MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 429 of 446 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

Motor buzzed and dryer drum would not spin when pressing start

  • Customer: Frederick W. from Austin, TX
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 151 of 224 people found this instruction helpful
From the first time the motor buzzed (but dryer tumbler then started to turn), 2 weeks elapsed for the dryer drum to stop turning altogether. If this occurs, DO NOT continue to push the start button because the motor armature wiring will heat up and the insulation will begin to melt and smell - a SAFETY HAZARD. Unplug dryer and lockout/tagout as appropriat... read more

catch mounted on door broke

  • Customer: Paul from Mt. Pleasant, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 65 of 85 people found this instruction helpful
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in. read more