Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDE16PDAZW > Parts

MDE16PDAZW Maytag Dryer - Parts

All parts for the Maytag Dryer MDE16PDAZW

Below is a list of all parts for the Maytag Dryer MDE16PDAZW - Commercial. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the MDE16PDAZW
1-14 of 69
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.85

Drum Support Roller Kit

This drum support roller kit includes one drum roller and two bearings/washers. Most dryers use two drum rollers; it is recommended to change both at once. The drum support roller ...

$4.60

Roller Shaft

This roller shaft is also known as a support roller shaft or a drum roller axle, and is a part for your dryer. The function of this piece is to act as the axle for the drum roller; it provides a place for the roller to spin. The tools required for this repair include a stubby Phillips screwdriver, a 5/16 nut driver, a pair of snap ring pliers, and a 9/16 wrench. The first step before making this repair should be to disconnect your dryer from the power source.

$9.89

Front Glide Kit

The front glide is located at the front of the dryer and the drum rides along it. If you hear a metal-on-metal noise when your dryer is running, your front glide may be worn out an...

$14.56

Multi Rib Belt - 91-5/8"

At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.

$2.94

Retaining Ring

This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than ...

$10.16

Dryer Drum Felt Seal

This is a drum felt seal for your dryer. It creates an airtight seal between the dryer rear panel and the back of the drum. It is important that this seal be flexible so it does not interfere with the function of the appliance. This model may be used for the front or the rear of your appliance. Take note that the adhesive is not included. The most common reason for needing to repair this part is if your dryer will not tumble, or there is not enough heat to properly dry your clothing.

$11.60

Drum Roller Shaft Washer

If you notice that your dryer is noisy or will not tumble, then you may need to replace the drum roller shaft washer. This drum roller shaft washer is just under an inch in diamete...

$26.76

Tall Baffle

This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle. NOTE: Screws are NOT included.

$25.81

Short Baffle

This part moves the clothes around inside your dryer and helps to direct the flow of hot air during the drying cycle.

$19.62

High Limit Thermostat (Limit: 200-30)

This high limit/safety thermostat is used on many of Maytag's brands of gas and electric clothes dryers. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 200 degrees Fahrenheit. The element will kick back in when the temperature drops to 170 degrees Fahrenheit.

$4.07

Screw

This screw is sold individually.

$4.94

Roller Shaft Hex Nut

This roller shaft hex nut measures well under an inch long. It is made of metal and is used for Maytag brand clothes dryers.

$7.88

Push Button

This push button is just over three inches long. It is all black in color and is made of plastic.

$22.39

Thermal Fuse

This thermal fuse is mounted on either the heating element or burner tube housing.

All Parts for the MDE16PDAZW
1-14 of 69