Models > MDE16PDAYQ

MDE16PDAYQ Maytag Dryer - Overview

Get Parts and Repair Help for MDE16PDAYQ

If you know the dryer repair part you need, you can browse the list of all parts on the MDE16PDAYQ, or you can search by name or part description. You can also find your part by where it is located on the MDE16PDAYQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for MDE16PDAYQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$19.73

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

$5.00

Roller Shaft

This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.

$12.51

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit -...

$17.81

Multi-Rib Belt

At 91-5/8" long, this dryer drum belt has 5 ridges and is 3/8" wide.

$8.80

Idler Pulley Wheel and Bearing

This wheel spins on the pulley shaft.

$32.53

Lint Filter

This filter collects lint as it passes through the dryer vent.

$2.70

Retaining Ring

$2.70

Drum Roller Shaft Washer

This part is sold individually.

$3.96

Idler Shaft Washer

This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color. Sold individually.

$8.07

Drum Felt Seal

This seal can be used for the front or rear drum. Adhesive is NOT included.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lint into venting area.

  • Customer: Anthony from DeKalb IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 466 of 468 people found this instruction helpful
Removal of old lint collector and replace with new one. read more

dryer squeeking

  • Customer: gerald from park city MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 395 of 404 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

The old lint screen had a couple tears in it

  • Customer: Ron from Monte Vista CO
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 366 of 369 people found this instruction helpful
No problem at all, just took out the old one in front and slid in the new one. read more