MDE16CSDYW Maytag Dryer - Instructions

Installing the Front Glide Kits was straight forward if you watch the video. The guides resolved a part of my problem, but I discovered the Blower Wheel was cracked and out of round. replaced it and poof its fixed!

noticed that male half was in good working order, so I just snapped in the new female half; without any tools. easy repair!

watched the video, took the dryer apart, installed the new parts, reassembled the dryer, video was very helpful .

Followed the guidance on video.

found info describing the nocking noise found parts to fix it watched video on how to do the repair The step by step instructions made the job so easy We saved over 150.00 in doing the job ourselves. thank you I am amazed at how simple this turned ou to be.

Sorry didnt unplug it. Just took door off. undid next panel and moved it to the side. Took bottom front panel couple of hex screws. Lifted basket out a little took belt off and replaced with new belt reversed order of panels and started it up.

I followed the instructions

Someone thought it was rollers. It was not. Maybe motor. Will check out further. Thanks for good service, Cynthia

I originally thought the belt broke, so I ordered a belt first. Once my friend broke the dryer down, it turned out to be the pulley. In any case, we still went ahead and put the new belt on since it had never been replaced anyway. I was not home when my friend put the pulley on, but my dryer is much quieter and running just great. I'm just glad I found this site online.

My take apart, fix-it son, Had it all apart and fixed in under 2 hrs. Thanks for quick delivery.

Unscrewed old screws, removed old plastic pieces, and replaced

I removed the front Panel of the dryer. I then removed two screws with the nut driver holding the heating element in place. After removing the old element I removed two screws holding the thermostat on the old element. I then used these screws to attached the new thermostat to the new element. I then put the new element in place and reattached with the screws, put the wires back on and replaced the front panel and wha la I had heat again.

We took the dryer apart to get to the drum to replace the baffle that had broken off.We watched the video on your web site to see how to take the dryer apart.Now it works great and saved me $150.00 for a repair.

followed online instructions plus did extensive cleaning on fan blower and air exist chambers along with the removeable lint fileter chamber and any other dust inside the main cabinet. Cleaned residue buildup on belt and drum surface areas. Drum roller kits did not supply or mention the spring wave washers located on the back side of the roller which keep the wheels from moving back and forth on the shaft. All phases went ver well and dryer is now running very quiet again.

Very easy repair, replacement part fit perfect. Removed drier door, and removed front panel. I little tight but can reach the screw holes and re-attach the baffle, used the same screws found them laying beneath the drum...May want to order new screws just in case you can't find the old ones. This is a great site used it before for drier repair...Thank you!