Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDE13PDACL

MDE13PDACL Maytag Dryer - Overview

Get Parts and Repair Help for MDE13PDACL

If you know the dryer repair part you need, you can browse the list of all parts on the MDE13PDACL, or you can search by name or part description. You can also find your part by where it is located on the MDE13PDACL by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for MDE13PDACL parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.85

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

$10.18

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit - purchase locally.

$16.33

Blower Wheel with Clip

This comes with a metallic hub clip to hold it firmly in place.

$16.63

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$10.08

Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

$116.32

Drive Motor - 60Hz 115V

This motor comes with a redesigned motor switch. This part runs at 1/4hp. It performs 1725 revolutions per minute and carries 4.5 amps and 115V.

$46.29

Tall Baffle

This part moves the clothes around inside your dryer and helps to direct the flow of hot during the drying cycle.

$4.94

SCREW

$29.54

HINGE- DOO

$5.38

Terminal Insulator

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The blower fan (nylon) stripped off the motor shaft (steel)

  • Customer: Stephen from Lafayette, IN
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 513 of 513 people found this instruction helpful
Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years. read more

dryer squeeking

  • Customer: gerald from park city, MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 430 of 447 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

Belt broke on old machine.

  • Customer: John from Charlottesville, VA
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 431 of 530 people found this instruction helpful
1. Removed front of machine (2 screws at the bottom).
2. Removed 4 screws from inside the dryer, to take off the blower housing.
3. Removed 4 screws and took out the large metal piece which supports the drum at the front. Removed the drum.
4. Replaced the two rollers that support the drum in the rear. Cleaned the pins they run on, and oiled ve... read more