Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
If you placed an order on ApplianceHelp.com the order is still valid and you can check on its status and make changes here on PartSelect.com. Click here for more details.
Below is a list of all parts for the Maytag Dryer MDE10PSADW - MANUAL, PARTS (DRYER ELE). To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.
At 100" in length, this dryer drum belt is 3/8" wide and has 5 ridges. This is the belt that is from the tumbler to the main drive motor.
This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit -...
This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.
This comes with a metallic hub clip to hold it firmly in place.
This filter collects lint as it passes through the dryer vent.
This part is sold individually.
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color. Sold individually.
This part is used to help the belt to rotate the drum.
This part replaces older two terminal switches.
This kit comes in two pieces: the catch and the clip.
Seal only, adhesive not included.
This high limit/safety thermostat is used to prevent overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 200 degrees Fahrenheit. The element will kick back in when the temperature drops to 170 degrees Fahrenheit. Differential of 30 degrees.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.