Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDDQ40FW1 > Parts

MDDQ40FW1 Frigidaire Dehumidifier - Parts

All parts for the Frigidaire Dehumidifier MDDQ40FW1

Below is a list of all parts for the Frigidaire Dehumidifier MDDQ40FW1. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the MDDQ40FW1
1-14 of 44
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$32.65

Compressor Start Relay

The compressor start relay attaches to the compressor in your refrigerator. If your refrigerator will not start, one of the most common parts to fail is the compressor start relay....

$31.97

Float

If the bucket is full indicator on your dehumidifier is on, but the bucket is empty, or your dehumidifier is overflowing, you may have a problem with the float. This device is located near the bucket and moves up as the water level in the bucket rises. The float will trip the water level switch when the bucket is full. This is a safety device to prevent the unit from overflowing. When the switch is tripped, power to the compressor and fan motor circuits is disrupted until the bucket is emptied. Make sure that the float assembly can move or pivot freely so that it can trigger the level switch when the bucket is full. If the assembly is warped or damaged it should be replaced.

$25.98

Auto Shut Off Switch

The auto shut off switch is for dehumidifiers. If the water bucket is not attached properly the switch will ensure the compressor does not run. You may need to perform a continuity...

$6.59

SCREW

$1.24

STRAP-COVER MTG

Water Container Reservoir and Float

$1.08

LENS

This indicator light lens protects bulbs in ranges, ovens, stoves, and humidifiers. The lens keeps the bulb from getting cracked, scratched, and damaged. It is 1 inch long and 1 in...

$96.49

Humidistat Control

This is a humidistat control for a dehumidifier. The humidistat on your dehumidifier responds to the humidity in the air to determine if the appliance should continue to dehumidify or shut off, based on the desired humidity level. This control needs to be replaced if the dehumidifier wont shut off when the desired humidity level is reached. This part is approximately 3.5 inches long and 1.5 inches wide. The part will be easy to replace, simply remove the front cover, remove the humidistat from the bracket, and remove the two push-on wire connectors. Reverse this process to reinstall the control. Be sure to disconnect power to the dehumidifier before completing this repair.

$58.54

BLADE-FAN

$3.71

SCREW

$143.35

Defrost Thermostat

The thermostat senses that the heat near the cooling coils has reached the desired temperature.

$230.78

MOTOR-FAN

$33.14

FILTER

$42.55

OVERLOAD

All Parts for the MDDQ40FW1
1-14 of 44