Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDB9601AWW

MDB9601AWW Maytag Dishwasher - Overview

Get Parts and Repair Help for MDB9601AWW

If you know the dishwasher repair part you need, you can browse the list of all parts on the MDB9601AWW, or you can search by name or part description. You can also find your part by where it is located on the MDB9601AWW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for MDB9601AWW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$34.92

Silverware Basket - Split/Fit

This is now one complete basket instead of being sold in 2 halves.

$43.62

Heating Element - Element ONLY

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.

$43.44

Float Switch Kit

Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the switch to shut off, thereb...

$122.26

Electronic Control Board

This part is also known as the "brains" of the appliance.

$28.78

Rack Adjuster Lever

$30.36

Small Items Silverware Basket

$7.00

Rack Adjuster Stabilizer

$4.07

Rack Cap - Gray

Sold individually.

$4.12

Upper Cup Shelf

Air or Water Inlet Cover

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken latch handle

  • Customer: Walter from Tucson, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 678 of 684 people found this instruction helpful
The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is ... read more

Door release latch handle was broken. The handle was deeply recessed into the door and the door was difficult to open.

  • Customer: Dave from Livonia, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 492 of 492 people found this instruction helpful
Remove the 8 or 9 torx screws holding the inner and outer door assembly together (leave the bottom screws in), lift the old handle assembly out, transfer the switches to the new handle assembly, and reassemble door. read more

door would not open

  • Customer: jeff from strongsville, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 380 of 381 people found this instruction helpful
remove torq scew from edge of inside of door and seperate plastic inner panel from out steel and then pull up on plastci unscrew 2 screw securing handle and reverse to assemble. Anyone can door this in under 10 mins. read more