Models > MDB9600AWS

MDB9600AWS Maytag Dishwasher - Overview

Get Parts and Repair Help for MDB9600AWS

If you know the dishwasher repair part you need, you can browse the list of all parts on the MDB9600AWS, or you can search by name or part description. You can also find your part by where it is located on the MDB9600AWS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for MDB9600AWS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$28.27

Door Handle and Latch Assembly with Switches

This part includes the black handle, latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

$3.91

Lower Wheel Assembly

Sold individually.

$3.81

Fold Away Tine Pivot

$4.01

Tine Pivot

Sold individually.

$40.23

Rack Adjuster with Wheels- Right Side

This adjuster connects to the right hand side of the top dishrack. It is used to change the height of the upper rack.

$40.39

Rack Adjuster with Wheels - Left Side

This adjuster connects to the left side of the top dishrack. It is used to change the height of the upper rack.

$25.84

Silverware Basket - Split/Fit

This is now one complete basket instead of being sold in 2 halves.

$22.09

Inner Door Foam Insulation Strip

Helps prevent leaking from the door area.

$18.71

Docking Station with Flappers

The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.

$46.93

Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

2 broken wheels on basket

  • Customer: jeanne from waynesboro TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 362 of 364 people found this instruction helpful
unwrapped wheels ,pulled out drawer and easily put on new wheels...as we live way out in the boonies it was great to be able to order parts and have them delivered so fast...easy to fix.... read more

Latch handle broke due to Latch Assembly worn

  • Customer: Dennis from Austin TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 194 of 262 people found this instruction helpful
This repair was fairly quick and easy. The parts are much better made than the stock Maytag. The parts from PartSelect came lightening quick! Never used before, always Sears, but will ALWAYS use from now on!
So, first, make super sure all power is disconnected. Then take the torx and remove all the screws on interior front cover - the top center two... read more

The handle was broken and hanging loose so the door was not easily opened.

  • Customer: Scott from Ringgold GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 118 of 180 people found this instruction helpful
First, I researched the part on this website and found the suitable replacement part...the number is different from the original Maytag part. I placed the order and the part arrived quickly. Then I used the appropriate driver to loosen the 11 screws that are around the inside of the door. I pulled up on the plastic panel to gain access to the handle and ... read more