Models > MDB9150AWS > Instructions

MDB9150AWS Maytag Dishwasher - Instructions

All installation instructions for MDB9150AWS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MDB9150AWS
571-585 of 591
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The tabs that hold the wheel on were broken

  • Customer: David from Herndon VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
With the help of the video that was part of the ordering process, the repair was VERY easy. It only took a few minutes, My wife did the repair by herself.

Door Spring linkage broke.... replaced

  • Customer: Vicki from Spokane WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Go to computer, log onto PartSelect, order part. Two days later, go to mailbox, open package. Go back to computer, log onto PartSelect, watch instructional video on how to install the part. Go to kitchen, do what the video showed you to do. Job done.

Basket Tray wore out on bottom and silverware would not hold.

  • Customer: Suzanne from South amboy NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just opened the package, pulled out the baskets, separated them and put them directly in the dishwasher. The video showed the part and size of the baskets which was very helpful. The delivery was EXCELLENT!!! I would purchase from PartSelect again!

replace the rail stop

  • Customer: Daniel from Merrimack NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
I bent the clip, inserted it the rail and snapped it shut. Easy as pie!

Spray arm fell out of top of washer because retainer had failed.

  • Customer: James from Dayton OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Watched on site video. Very helpful as it explained how to remove the upper and lower baskets to get at the upper cabinet nut. How to remove the nut and use a socket to compress the retainer rams so they would pass easily through the hole in the spray arm. Retainer nut replacement 1 minute. Removing and replacing baskets in machine another 5 to 10 minutes.

Plastic linkage had broken

  • Customer: Sandy from Grass Valley CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Followed the outstanding video instructions. Your company is fantastic. Your attention to detail, the quick shipment (one day) and video ... stellar! We will be referring your company to all!!! Thank you!!!!

I needed a replacement silverware basket

  • Customer: Jillene from Green Bay WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I took the old one out of the dishwasher and put the new one in. The new one is much nicer and heavier than the original one!

Age made the clips brittle and they broke

  • Customer: Douglas King from Evansville IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Snapped in the new ones in a skinny minute. Just make sure you leave the old ones in the dishwasher rack until the new ones come in it can be confusing if they are removed. My wife took them out so I had to figure out how they went back in but was not a big issue. I did have to swap ends to make it right but less than fifteen minutes and like new again.

lime up

  • Customer: myron from Indianapolis IN
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
took inside front off disconnect wires pull old unit out and put new unit in then put inside front back on tighten screws was done unit works like a new machine

spray arm fell off

  • Customer: Mr. Perry from Overland Park KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Watched the video ordered the part. It was delivered the following morning. Un screwed the spray arm holder put the spray arm and retainer in the holder then screwed the holder back in the dishwasher.

Leak

  • Customer: J Roy from Oak Park IL
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I think anytime the motor needs to come out of an older dishwasher, it would be wise to replace the main gasket that goes around the motor at the same time.

The lower dish rack has only six wheels three on a side the original had eight wheels four on a side. This new rack does not stay on track.Is there any way to add two more wheels .If not how can I return for the correct rack?

  • Customer: Theodore from East Greenwich RI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Need correct lower rack

plastic piece that holds spring broke

  • Customer: Len from Woodland Park NJ
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Because mine is a portable dishwasher, I had to remove top first. the sides and back are one complete unit. the torque screws are in the front, 2 on top, and 2 in rear. Then the panels can slide back to access the spring. Replace the plastic piece & hooked on the spring. Reassemble in reverse order.

silverwear basket was cracked/

  • Customer: Marylou from Dana Point CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just dropped it in and that was it.

Old basket worn, silverware falling through holes

  • Customer: Thomas from Washington PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took old basket out, put new basket in
All Instructions for the MDB9150AWS
571-585 of 591