Models > MDB9150AWB > Instructions

MDB9150AWB Maytag Dishwasher - Instructions

All installation instructions for MDB9150AWB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MDB9150AWB
571-584 of 584
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The lower dish rack has only six wheels three on a side the original had eight wheels four on a side. This new rack does not stay on track.Is there any way to add two more wheels .If not how can I return for the correct rack?

  • Customer: Theodore from East Greenwich RI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Need correct lower rack

plastic piece that holds spring broke

  • Customer: Len from Woodland Park NJ
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Because mine is a portable dishwasher, I had to remove top first. the sides and back are one complete unit. the torque screws are in the front, 2 on top, and 2 in rear. Then the panels can slide back to access the spring. Replace the plastic piece & hooked on the spring. Reassemble in reverse order.

silverwear basket was cracked/

  • Customer: Marylou from Dana Point CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just dropped it in and that was it.

Old basket worn, silverware falling through holes

  • Customer: Thomas from Washington PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took old basket out, put new basket in

Old silverware basket "collapsed"

  • Customer: Lawrence from Newport ME
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took out old, put in new; threw away old. :-)

dishwasher making scraping noise when running

  • Customer: Doug from Columbia City IN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Took the dishwasher apart, then went the website and found an extra part. The discharge pump housing had broken into two parts. Order the patrs needed, they came in two days and put the dishwasher back together. It was easy with the help of the website and runs like almost new

Not cleaning bottom rack as wheels broke off

  • Customer: Paul from Cave Creek AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Snapped on 5 new wheels in under 5 minutes and this raised lower shelf to keep from hitting circulating water spigots beneath the shelf. Cleans like it was new again!

Dishracks were worn, pieces broke off

  • Customer: Richard from Lyndhurst NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replaced both upper and lower Dishracks, the Parts Select video shows how to replace the top rack but doesn't mention the lower one. Had a bit of a problem trying to figure out how to remove the spout on the bottom rack. Finally figured out, twist it counter clockwise to remove it and turn it clockwise to reinstall it onto the new lower rack.

THE OLD SILVERWARE BASKET HAD HOLES IN IT.

  • Customer: Janet from Greenwich CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I REPLACED THE OLD ONE WITH A NEW ONE.

rotting rack

  • Customer: Mary from New Hartford CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
very easily, old rack out, new rack in

PART BROKE

  • Customer: Gordon from Swanton VT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
WATCHED THE VIDEO AND IT WAS A SNAP. THANKS

Larch would not work

  • Customer: Cheryl from Roscommon MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just followed other peoples instructions. Part got here in two days, was very impressed.

silverware basket broken

  • Customer: Timothy from WHITE CLOUD MI
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
lifted old one out put new one in

Snap retainer broke, dealer said he couldn't get it. Found your website, ordered the part and it came by FedEx in four days,

  • Customer: Roger from Keota IA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The spray arm was badly limed up, so I cleaned out the spray holes, inserted the retainer and snapped the arm in place. Works perfectly. Thanks!!
All Instructions for the MDB9150AWB
571-584 of 584