Models > MDB8751BWW

MDB8751BWW Maytag Dishwasher - Overview

Get Parts and Repair Help for MDB8751BWW

If you know the dishwasher repair part you need, you can browse the list of all parts on the MDB8751BWW, or you can search by name or part description. You can also find your part by where it is located on the MDB8751BWW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for MDB8751BWW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.54

Silverware Basket - Gray

This part has been redesigned by the manufacturer and is now a complete full basket with handle and covers.

$28.05

Door Handle and Latch Assembly with Switches

This part includes the white handle, door latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

$4.91

Lower Wheel Assembly

Sold individually. This part is the wheel and the axle or clip that holds it on the dishrack.

$3.81

Fold Away Tine Pivot

$3.96

Convertible Tine Pivot

$18.71

Docking Station with Flappers

The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.

$46.93

Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the d...

$16.95

Wash Impeller

This impeller rotates and is used to force water up through to the spray arm.

$25.09

Door Latch with Switches - NO Handle

This is the door latch and switches only. The handle is not included with this part.

$70.46

Accumulator Filter

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The utensil basket was old, bowed and the bottom was falling out.

  • Customer: Janet from Plano TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 370 of 374 people found this instruction helpful
I ordered a new replacement basket. The new one is a little different but it fits in the same place and takes up the same amount of room in the dishwasher. It looks very nice too. read more

door would not open

  • Customer: jeff from strongsville OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 368 of 369 people found this instruction helpful
remove torq scew from edge of inside of door and seperate plastic inner panel from out steel and then pull up on plastci unscrew 2 screw securing handle and reverse to assemble. Anyone can door this in under 10 mins. read more

Door handle broke but dishwasher still works

  • Customer: Wendy from W Melbourne FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 196 of 263 people found this instruction helpful
For probably a year I have been using my dishwasher with a broken handle. I would just pull the door out with a little bit of force to open it. Still I was concerned it would eventually break something else. After reading other people's experience with replacing it, it didn't sound like such a difficult repair and the part was less than 30 dollars countin... read more