Models > MDB8751BWQ

MDB8751BWQ Maytag Dishwasher - Overview

Get Parts and Repair Help for MDB8751BWQ

If you know the dishwasher repair part you need, you can browse the list of all parts on the MDB8751BWQ, or you can search by name or part description. You can also find your part by where it is located on the MDB8751BWQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for MDB8751BWQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$11.58

Silverware Basket - Gray

This part has been redesigned by the manufacturer and is now a complete full basket with handle and covers.

$4.95

Lower Wheel Assembly

Sold individually. This part is the wheel and the axle or clip that holds it on the dishrack.

$26.77

Door Handle and Latch Assembly with Switches

This bisque door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. Please NOTE: The bisque handle is no long...

$3.61

Fold Away Tine Pivot

$65.72

Accumulator Filter

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty...

$2.70

Hose Clamp

$25.09

Door Latch with Switches - NO Handle

This is the door latch and switches only. The handle is not included with this part.

$3.76

Convertible Tine Pivot

$16.95

Wash Impeller

This impeller rotates and is used to force water up through to the spray arm.

$21.09

Docking Station with Flappers

The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

One of the wheel assemblies fell off and melted in the dishwasher.

  • Customer: Kathryn from Oak Creek CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 458 of 460 people found this instruction helpful
I ordered the part and snapped it on. It was so easy to find the part on the website and it came very quickly. I am a satisfied customer! read more

The utensil basket was old, bowed and the bottom was falling out.

  • Customer: Janet from Plano TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 384 of 388 people found this instruction helpful
I ordered a new replacement basket. The new one is a little different but it fits in the same place and takes up the same amount of room in the dishwasher. It looks very nice too. read more

Broken door operating handle (unit broke at the hinge)

  • Customer: Richard from Bridgewater NJ
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 116 of 121 people found this instruction helpful
First - Make sure electricity to the dishwasher is turned off. Very important for there are exposed electrical connectors in the location where you will be making the repair. Second - removed the inner door liner. Removal is by unscrewing the tork screws around the perimeter of the assembly (when you take this inner door liner/cover be careful because the d... read more