Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDB8750AWW

MDB8750AWW Maytag Dishwasher - Overview

Get Parts and Repair Help for MDB8750AWW

If you know the dishwasher repair part you need, you can browse the list of all parts on the MDB8750AWW, or you can search by name or part description. You can also find your part by where it is located on the MDB8750AWW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for MDB8750AWW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$29.35

Door Handle and Latch Assembly with Switches

This part includes the black handle, latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. NOTE: White ha...

$10.21

Silverware Basket - Gray

This part has been redesigned by the manufacturer and is now a complete full basket with handle and covers.

$8.93

Upper Rack Wheel

Sold individually.

$9.01

Lower Wheel Assembly

This lower dishrack roller is less than two inches in diameter. It is made entirely of plastic.

$30.29

Door Latch with Switches - NO Handle

This is the door latch and switches only. The handle is not included with this part.

$5.15

Hose Clamp

$17.86

Docking Station with Flappers

The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.

$19.67

Wash Impeller

This impeller rotates and is used to force water up through to the spray arm.

$74.94

Accumulator Filter

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty...

$53.79

Water Inlet Valve

The valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken latch handle

  • Customer: Walter from Tucson, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 783 of 797 people found this instruction helpful
The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is ... read more

Door release latch handle was broken. The handle was deeply recessed into the door and the door was difficult to open.

  • Customer: Dave from Livonia, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 503 of 504 people found this instruction helpful
Remove the 8 or 9 torx screws holding the inner and outer door assembly together (leave the bottom screws in), lift the old handle assembly out, transfer the switches to the new handle assembly, and reassemble door. read more

Replace wheel

  • Customer: Anthony from Greenwich, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 472 of 474 people found this instruction helpful
Tghe old one snaps off and the new one snaps right in . read more