Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDB8600AWS

MDB8600AWS Maytag Dishwasher - Overview

Get Parts and Repair Help for MDB8600AWS

If you know the dishwasher repair part you need, you can browse the list of all parts on the MDB8600AWS, or you can search by name or part description. You can also find your part by where it is located on the MDB8600AWS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for MDB8600AWS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$31.38

Door Handle and Latch Assembly with Switches

This is a part found in your dishwasher. This part includes the black handle, latch, and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from opera...

$7.33

Lower Wheel Assembly

This lower dishrack roller is less than two inches in diameter. It is made entirely of white plastic. If you find that your dishwasher is making loud noises or the lower rack is getting stuck when you are moving it in or out, it could be that the lower wheel assembly needs to be replaced. The dishrack wheels allow for easy movement of the dishrack in and out of the dishwasher. These rollers tend to wear down at the same speed, so it is recommended to replace both pairs at the same time. Open your dishwasher and remove the bottom rack, locate the locking tab, and rotate until it easily slides out of place. Slide the new wheel over the shaft and locate the locking tab to snap back into place.

$30.29

Door Latch with Switches - NO Handle

This door latch, used in dishwashers, is located at the top of the door and locks the door shut when the dishwasher is working. If the door will not close or is damaged, changing t...

$32.12

Silverware Basket - Split/Fit

This is now one complete basket instead of being sold in 2 halves.

$17.22

Inner Door Foam Insulation Strip

This genuine inner door foam insulation strip, sometimes known as bottom seal foam, is used to create a waterproof seal that helps prevent leaking from the door area of the dishwas...

$19.75

Docking Station with Flappers

If you notice that your dishwasher is leaking, or is not cleaning dishes properly, you may need to replace the docking station. The docking station is located on the water supply tube at the back of the appliance. It provides water to the upper and middle spray arm. This part comes with the accompanying flappers. This product is approximately 4 inches in length and 2 inches in width, and is made of white and gray plastic. To access the docking station, you will need to remove the upper rack. To do this, simply remove the end caps that keep the rack on the slides. Make sure to attach the flappers to the docking station before installing it in the dishwasher.

$3.02

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air...

$4.48

Fold Away Tine Pivot

$56.75

Door Seal - Black

This is a door seal, and it is used in conjunction with your dishwasher. The seal may also be known as a door gasket and is black in color. The function of this part is to provide ...

$4.89

Door Cable Link

This is a part for your dishwasher. The door cable link helps to keep the door steady and give support to the weight of the door when it is being opened or closed. If you notice the door latch has failed or the door is not closing properly, this might indicate a need to have the door cable link replaced. To perform this repair, you will start by turning the power off from the appliance. You will need to pull the unit out of installation. To access the cables, you will need to remove the side panel. You should be able to see the cables underneath the panel once removed.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Handle jammed and door wouldn't open on Maytag Quietseries 100 dishwasher

  • Customer: Philip from Carlsbad, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 544 of 558 people found this instruction helpful
I Followed others' instructions already posted to replace the whole handle assembly. In particular, use a big screwdriver placed against the bottom of the handle and whack the grip with the palm of your hand to get the handle to move back to the open position so you can open the door and start the job. I am no handyman, but this fix was easy, about 30 minu... read more

2 broken wheels on basket

  • Customer: jeanne from waynesboro, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 367 of 370 people found this instruction helpful
unwrapped wheels ,pulled out drawer and easily put on new wheels...as we live way out in the boonies it was great to be able to order parts and have them delivered so fast...easy to fix.... read more

Latch handle broke due to Latch Assembly worn

  • Customer: Dennis from Austin, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 299 of 377 people found this instruction helpful
This repair was fairly quick and easy. The parts are much better made than the stock Maytag. The parts from PartSelect came lightening quick! Never used before, always Sears, but will ALWAYS use from now on!
So, first, make super sure all power is disconnected. Then take the torx and remove all the screws on interior front cover - the top center two... read more