Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDB8600AWQ

MDB8600AWQ Maytag Dishwasher - Overview

Get Parts and Repair Help for MDB8600AWQ

If you know the dishwasher repair part you need, you can browse the list of all parts on the MDB8600AWQ, or you can search by name or part description. You can also find your part by where it is located on the MDB8600AWQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for MDB8600AWQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.33

Lower Wheel Assembly

This lower dishrack roller is less than two inches in diameter. It is made entirely of white plastic. If you find that your dishwasher is making loud noises or the lower rack is ge...

$30.29

Door Latch with Switches - NO Handle

This door latch, used in dishwashers, is located at the top of the door and locks the door shut when the dishwasher is working. If the door will not close or is damaged, changing the latch could be the solution. For this repair, remove all screws from the inner panel, then lift up the inner door panel and hold the door apart. Next, access the latch and pull wires from the switches. Refer to the manual provided by the manufacturer for further instructions and guidance. Remember to unplug the dishwasher from the power source or shut off the house circuit breaker before beginning this installation project.

$32.12

Silverware Basket - Split/Fit

This is now one complete basket instead of being sold in 2 halves.

$17.22

Inner Door Foam Insulation Strip

This genuine inner door foam insulation strip, sometimes known as bottom seal foam, is used to create a waterproof seal that helps prevent leaking from the door area of the dishwasher. The existing insulation strip may leave a sticky residue or leftover disintegrated strip that must be scraped off before installing the new strip. Residue can be scraped off with a putty knife. Be sure to remove all residue and clean surrounding areas of the dishwasher build. It is strongly recommended to check other sealant parts on the dishwasher door such as the door gasket and dispenser grommet to ensure the leaking issue is fully solved.

$19.75

Docking Station with Flappers

If you notice that your dishwasher is leaking, or is not cleaning dishes properly, you may need to replace the docking station. The docking station is located on the water supply t...

$3.02

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

$4.48

Fold Away Tine Pivot

$56.75

Door Seal - Black

This is a door seal, and it is used in conjunction with your dishwasher. The seal may also be known as a door gasket and is black in color. The function of this part is to provide a waterproof blockage between the dishwasher tub and the outer edge of the door. If there is breakage in your part you will know quickly, as the most common symptom of needing to replace this piece is leakage from your dishwasher door. Once this piece has been installed it is best to close the dishwasher, and leave it in that position for several hours. This will allow this new seal to properly sit.

$47.88

Rack Adjuster with Wheels - Left Side

This adjuster connects to the left side of the top dishrack. It is used to change the height of the upper rack.

$4.89

Door Cable Link

This is a part for your dishwasher. The door cable link helps to keep the door steady and give support to the weight of the door when it is being opened or closed. If you notice the door latch has failed or the door is not closing properly, this might indicate a need to have the door cable link replaced. To perform this repair, you will start by turning the power off from the appliance. You will need to pull the unit out of installation. To access the cables, you will need to remove the side panel. You should be able to see the cables underneath the panel once removed.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

2 broken wheels on basket

  • Customer: jeanne from waynesboro, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 367 of 370 people found this instruction helpful
unwrapped wheels ,pulled out drawer and easily put on new wheels...as we live way out in the boonies it was great to be able to order parts and have them delivered so fast...easy to fix.... read more

Broken door operating handle (unit broke at the hinge)

  • Customer: Richard from Bridgewater, NJ
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 169 of 179 people found this instruction helpful
First - Make sure electricity to the dishwasher is turned off. Very important for there are exposed electrical connectors in the location where you will be making the repair. Second - removed the inner door liner. Removal is by unscrewing the tork screws around the perimeter of the assembly (when you take this inner door liner/cover be careful because the d... read more

One of two plastic rollers on this metal part broke (twice)

  • Customer: Jim from Hendersonville, TN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 113 of 113 people found this instruction helpful
Remove the entire top dish rack by removing the two front covers on the left and right metal grooved slides. The covers are plastic. No tools are required. After removing the top dish rack, the rack adjuster (with two cheap plastic wheels) is easily removed with an allen wrench. There are six fasteners that must be removed to detach the rack adjuster... read more