Models > MDB7650AWW

MDB7650AWW Maytag Dishwasher - Overview

Get Parts and Repair Help for MDB7650AWW

If you know the dishwasher repair part you need, you can browse the list of all parts on the MDB7650AWW, or you can search by name or part description. You can also find your part by where it is located on the MDB7650AWW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for MDB7650AWW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$11.58

Silverware Basket - Gray

This part has been redesigned by the manufacturer and is now a complete full basket with handle and covers.

$26.31

Door Handle and Latch Assembly with Switches

This part includes the white handle, door latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

$3.71

Lower Wheel Assembly

Sold individually.

$40.23

Rack Adjuster with Wheels- Right Side

This adjuster connects to the right hand side of the top dishrack. It is used to change the height of the upper rack.

$3.61

Fold Away Tine Pivot

$22.09

Inner Door Foam Insulation Strip

Helps prevent leaking from the door area.

$40.39

Rack Adjuster with Wheels - Left Side

This adjuster connects to the left side of the top dishrack. It is used to change the height of the upper rack.

$65.72

Accumulator Filter

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.

$47.45

Door Seal

It provides a waterproof seal between the tub and the door.

$2.70

Hose Clamp

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken latch handle

  • Customer: Walter from Tucson AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 517 of 517 people found this instruction helpful
The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is ... read more

Door release latch handle was broken. The handle was deeply recessed into the door and the door was difficult to open.

  • Customer: Dave from Livonia MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 470 of 468 people found this instruction helpful
Remove the 8 or 9 torx screws holding the inner and outer door assembly together (leave the bottom screws in), lift the old handle assembly out, transfer the switches to the new handle assembly, and reassemble door. read more

The utensil basket was old, bowed and the bottom was falling out.

  • Customer: Janet from Plano TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 384 of 388 people found this instruction helpful
I ordered a new replacement basket. The new one is a little different but it fits in the same place and takes up the same amount of room in the dishwasher. It looks very nice too. read more