Models > MDB7600AWB > Instructions

MDB7600AWB Maytag Dishwasher - Instructions

All installation instructions for MDB7600AWB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MDB7600AWB
991-1005 of 1032
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

no wash action

  • Customer: Reno from Lake Montezuma AZ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
followed directions on video. easy as cake

Mis-installed pump seal (motor gasket) from factory.

  • Customer: Edward from Greenleaf WI
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Dissassembled dishwasher, replaced gasket and reassembled dishwasher.

None

  • Customer: Robert from Galveston TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Installed lower basket in 5 minutes

Lower Dishrack began to show areas of rust.

  • Customer: Garry C from Yucca Valley CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I simply removed old lower dishrack from dishwasher and discarded. Then I removed new lower dishrack from box and installed it into dishwasher, no tools necessary. How easy is that?! New lower dishrack is a perfect replacement and now our dishwasher is good to go. Thank you PartSelect for your fast service.

Dishwasher not drying dishes water not hot

  • Customer: Joseph from San diego CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Removed dishwasher unplugged heating element wires unscrewed nuts removed old element replaced with new one. Tightened nuts snapped wire connecters back reset dishwasher ran quick cycle hot steam and dry dishes.Thanks Joe (saved me 1,500 for a new one)

Our dishwasher was not heating up to dry dishes

  • Customer: Claude from Helotes TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
All steps were easy except the Maytag layout made it hard to get to the fittings to remove and reconnect the water line. After that we just moved the dishwasher from beneath the counter and laid it down on the front. Removing and testing the old heater element was easy. The hardest part of installing the element was the odd clips inside the dishwasher. I need to return the o-ring and nuts because you included them with the heating element.

Dishes weren't coming clean cause the water wasn't staying hot.

  • Customer: Jesse from Delavan WI
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
To be honest it was a very easy repair it actually took longer to disconnect and remove the dish washer from the cabinet than it did to install the heating element. Be sure to have towels ready cause when you tip the dish washer on its front to remove and re install the heating element water will leak out on to the floor.

Replace silverware basket.

  • Customer: Jerry from Lubbock TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Lifted old one out. Set new one in.

My old silverware basket was breaking away

  • Customer: Amy from WELLSVILLE UT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Ordered a new part and simply placed it in where the old part was, make sure you have measured the dimensions of your space, includes a handle for easy lifting, and snap doors for small accessories

The old silverware basket started cracking and coming apart after 5 years or so.

  • Customer: Brian from St. Louis MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I opened the door of the dishwasher, pulled out the old silverware basket, and then placed the new silverware basket where the old one was. The whole time, I was imagining how much it would be to call up and appliance repair guy and have him do this.

broken silverware basket

  • Customer: Janet from Norwood MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
This replacement basket fit perfectly, is well made, and came speedily, as promised!

Silverware basket was broken

  • Customer: Jack from Leesburg VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Take out old basket throw it away. Put in new basket. time: 20 seconds. It took longer to open the package. I'm guessing at the brand, and I'm not going to my other house to find out.

Silverware basket replacement

  • Customer: Mike from Wheat Ridge CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The silverware basket in my Maytag portable dishwasher was pretty flimsey. The replacement basket I got here seems more durable and I'm very happy with the quality. Shipping was fast and it was packaged very well!

Handle broke

  • Customer: Bruce from rogers AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Ordered new part pulled out old one put in new one

Silverware basket had worn out in places and knives were slipping through it

  • Customer: Maria from Benson AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simply took out the old basket and put in the new basket. Fits beautifully.
All Instructions for the MDB7600AWB
991-1005 of 1032