Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDB7600AWB > Instructions

MDB7600AWB Maytag Dishwasher - Instructions

All installation instructions for MDB7600AWB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MDB7600AWB
1-15 of 1,091
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Handle jammed and door wouldn't open on Maytag Quietseries 100 dishwasher

  • Customer: Philip from Carlsbad, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 544 of 559 people found this instruction helpful
I Followed others' instructions already posted to replace the whole handle assembly. In particular, use a big screwdriver placed against the bottom of the handle and whack the grip with the palm of your hand to get the handle to move back to the open position so you can open the door and start the job. I am no handyman, but this fix was easy, about 30 minutes in all, most of which was spent figuring out which breaker to pull so as not to get shocked. One note of caution: use the correct screwdriver attachment (not a Phillips head or regular, but a star or something- see I am not a handyman but I do have a $15 screwdriver set that just paid for itself 10 times over!).

The utensil basket was old, bowed and the bottom was falling out.

  • Customer: Janet from Plano, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 468 of 478 people found this instruction helpful
I ordered a new replacement basket. The new one is a little different but it fits in the same place and takes up the same amount of room in the dishwasher. It looks very nice too.

2 broken wheels on basket

  • Customer: jeanne from waynesboro, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 367 of 370 people found this instruction helpful
unwrapped wheels ,pulled out drawer and easily put on new wheels...as we live way out in the boonies it was great to be able to order parts and have them delivered so fast...easy to fix....

Latch handle broke due to Latch Assembly worn

  • Customer: Dennis from Austin, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 303 of 382 people found this instruction helpful
This repair was fairly quick and easy. The parts are much better made than the stock Maytag. The parts from PartSelect came lightening quick! Never used before, always Sears, but will ALWAYS use from now on!
So, first, make super sure all power is disconnected. Then take the torx and remove all the screws on interior front cover - the top center two actually hold the latch assembly and handle. Once all are removed, I propped the cover up and left all wiring connected. I removed the switches connected to the old latch assembly and just removed the new switches from the new latch assembly, and popped the old ones onto the new latch assembly. Now have new switches if the old ones ever wear out.
The latch assembly just pops out from what should be two sets of plastic peg clips molded into the black control panel back. Mine were busted on one side. So I molded some jb weld on the remaining sides to the pegs on the latch assembly and then screwed all back together (the controls on the panel are fine, not spending $85 if I can get away with sticking it...and the upper center two screws do the most of the holding anyway).
Works great again. I really am ultra impressed with the HUGE difference in reinforcement that the new handle has. If Maytag would have built it that way to begin with, should not have broke. Anyway, if you are here just checking to see if you can do and how much parts are, place the order - it is no problem and cheap, and will probably never give up and break again.

Broken latch assembly and handle, cracked control panel.

  • Customer: Dennis from San Marcos, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 130 of 143 people found this instruction helpful
I ordered a new control panel, latch assembly and latch handle. The panel and latch assembly (which includes two contact switches) came quickly, the cheapest part (latch handle) was on back order. I was surpised when the handle came because it included a new latch assembly with the handle already attached, maybe an improved design?
I shut off elecricity to the dishwasher, opened the door and removed the 11 torx T-20 screws. The inner panel lifts up and I then unplugged the electrical connector at the soap dispenser, unplugged the 2 connectors at the latch assembly contact switches (remember which is which). The inner panel can be removed and set aside. These connectors are tight coming off, so use care and maybe some Channel locks to wiggle them loose. If your changing the control panel, remove the cover over the circuit board, a ribbon connector goes into this and has a sliding collar, slide up to loosen and remove the ribbon, fully insert the new ribbon and slide back down to tighten.
I used a 1/4 inch nut driver to remove the screws holding the panel. The latch assembly with handle attached snaps into brackets on the panel, re-install the control panel, routing the ribbon cable carefully. Replace the cover over the electronics, plug all the elecrical connections back in, replace the torx screws. Turn on the power. The new parts seem much better than the original.

Maytag makes a really crappy silverware basket. The bottom of ours fell apart the first year.

  • Customer: Kenneth from Houston, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 156 of 226 people found this instruction helpful
There was no repair to be done. Just replaced the defective basket with the new one.
I got the part two days after ordering it. Great service.

One of two plastic rollers on this metal part broke (twice)

  • Customer: Jim from Hendersonville, TN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 116 of 116 people found this instruction helpful
Remove the entire top dish rack by removing the two front covers on the left and right metal grooved slides. The covers are plastic. No tools are required. After removing the top dish rack, the rack adjuster (with two cheap plastic wheels) is easily removed with an allen wrench. There are six fasteners that must be removed to detach the rack adjuster from the rack.

If only 1 of the 2 cheap plastic wheels on this assembly is broken, do not throw away the old assembly. The functional plastic wheel can be removed and saved for the next time one breaks!!! This cheap plastic wheel cannot be purchased separately from the entire rack adjuster assembly.

The bottom of our dishwasher's old utinsel basket broke out

  • Customer: Wade from Seattle, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 109 of 110 people found this instruction helpful
It was so easy to find the right part on the PartsSelect website. I just had to enter the manufacturer (Maytag) and model number and up popped skematics of all the parts available. I just clicked on the drawing of the basket and placed the order. It took less that 5 minutes. The part arrived 4 days later as promised. The repair took even less time than teh ordering. I simply took the old basket out and dropped in the new one.

I'm just happy to know there is a place that has such a user friendly website and stocks so many parts for older appliances. I had my house built in 1992 and several of the appliance are original. Fortunately I always keep the owners manuals for every piece of equipment so the model and serial numbers are readily available.

The handle was broken and hanging loose so the door was not easily opened.

  • Customer: Scott from Ringgold, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 137 of 201 people found this instruction helpful
First, I researched the part on this website and found the suitable replacement part...the number is different from the original Maytag part. I placed the order and the part arrived quickly. Then I used the appropriate driver to loosen the 11 screws that are around the inside of the door. I pulled up on the plastic panel to gain access to the handle and latch assembly and the old handle fell out as well as the latch assembly. I took off the electrical clips(this was the hardest part....you have to pull hard) and re-attached them to the new part. I put the handle and latch assembly in place-they come together as a single unit which makes it far easier to replace than just the handle alone-and then re-posistioned the plastic inner door, and finally tightened the screws. Shut the door and opened to test. Done deal. No problem.

Didn't spray water.

  • Customer: Joseph from Merrill, WI
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench (Adjustable)
  • 125 of 199 people found this instruction helpful
Inside the Dishwasher on the bottom of unit, I removed the dish cart. The removed the sprayer arm with an adjustable wrench on the plastic nut on the center top. Then removed the top three screws with a Torx 20 screw driver and removed the plastic cover, then removed the single screw above the black plastic water pump piece and took it off. Then removed the six additional screws that were then displated after the previous cover was exposed. Finally I unscrewed the ivory colored plastic shaft which holds the food processor blade from the metal motor shaft with a adjustable wrench. Upon inspecting the ivory plastic shaft I noticed that the threads were stripped inside it. Which means it didn't turn when the motor would turn and wouldn't drive the water pump.

I ordered the replacements and noticed that the replacement for the plastic ivory colored shaft was a metal shaft. It had new pieces as the food processor blade had notiches in new places. The kid had all the replacement parts and a good set of instructions for what to replace and where it would go.

Then I assembled the washer as I had taken it apart. And it worked perfectly the first time. It has been repaired and working for a few weeks now without incident.

Dishwasher not draining completely

  • Customer: Tim from Troy, OH
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 81 of 84 people found this instruction helpful
You have to pull the dishwasher out from underneath the counter and set it on its side. Before removing, I used a shop vac to remove any standing water from inside the dishwasher. Once I pulled out the dishwasher, I then tilted the dishwasher forward to let remaining water fall on the floor, again, using the wet vac for clean up. After it is on its side, I used a socket wrench to remove the one bolt that holds the drain valve on. Then I used a socket wrench to loosen the clamp for the drain hose and removed the hose. You then need to turn the entire drain valve 1/4 of a turn counter-clockwise to remove the old drain valve. Once it is off, remove the bracket from the old drain and attach it to the new drain valve using a phillips screwdriver. Before I reassambled the drain valve, I used my wet vac to remove any debree from where the drain valve connects to the dishwasher. Reverse the prior steps to install new drain valve and install dishwasher back under the counter. I tested the unit before installing the dishwasher back under the counter to insure it fixed the problem. The hardest part about doing this, was actually taking the dishwasher out from under the counter, very easy process in general. One thing I couldn't figure out about my original problem of the water not completely draining out, is why would the drain valve start draining the water then after 20 seconds it would stop? I couldn't find the answer, so I assumed the drain valve is like a 2 stage system and took a chance on replacing the drain valve; it worked.

Broken Inlet Valve due to freezing - water leak

  • Customer: Craig from Old Orchard Beach, ME
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Wrench (Adjustable)
  • 78 of 79 people found this instruction helpful
Most of the time was spent pulling out the dishwasher from under the counter, as a new tile floor had been installed after the DW was installed.

Great pictures of components on this website confirmed what part to order.

Shut off water feed to DW and disconnect power to DW.

Unplug wire connector to old valve (solenoid) and disconnect water inlet hose. Observe that valve is attached to sheet metal bracket.

Remove bracket, with valve attached. Don't remove valve from bracket. New valve comes with sheet metal bracket.

Remove female threaded adaptor (brass) from back of old valve and screw on to new valve using Teflon tape. That is the only piece you need to reuse.

Attached the new bracket (with valve attached) to DW. Attach water inlet hose. Attach plug to new valve.

Turn on water to DW. Check for leaks. Retighten hose connection if required. Run dishwasher. Keep lower panel off for a couple of days to be certain no leaks develop.

dishwasher door leaks

  • Customer: jerry from vernon, CT
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 73 of 81 people found this instruction helpful
I ordered and replaced both the door gasket (easy) and inner door seal (difficult) to try and correct a leak during operation. The door gasket was easily replaced. However, the inner door seal was a bit more trouble. After removing the inner door I found that the old inner seal needed to be removed and surfaces thoroughly cleaned of old build-up of dishwasher soap residue, in order to allow the sticky back tape side of door seal to properly stick to the door. There also was a plastic cover over the wire bundle that needed to be cleaned. The inner door seal was the exact length, so proper positioning of the sticky back was very important.
Upon reassemly the leak still existed and I was unable to correct the leak. Further inspection indicated that the basic tub/body of the dishwasher might be slightly distorted due to age and may not create seal with door seal as originally designed.
I guess I need to find a new dishwasher, at this point.
A word to the wise: Check to see if the tub/body is still in good condition.

Broken Wheels

  • Customer: Mary J. from Westwood, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 67 of 67 people found this instruction helpful
Snapped on new wheels

Supports for middle rack of dishwasher broke

  • Customer: Jesse from San Jose, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 70 of 80 people found this instruction helpful
The middle (plates and silverware) rack of my maytag dishwasher broke. The supports for the wheels were plastic hubs that bore the weight of the rack.

About a year after owning the dishwasher, the front two plastic wheel hubs that support the rack broke.

I ordered the left and right Rack Adjuster Assembly which included the main T shaped support rail including the two wheels. The good news is that these hubs are METAL which should not break like the weak plastic hubs of the previous version.

I removed about 4-5 screws from the original assembly, and installed the new rack adjuster assembly and replaced the screws. About 20 minutes total for both sides.

I also replaced the tracks since mine were somewhat bent after the original supports broke.

Very nice to have a fully operational / sturdy middle rack again on this dishwasher.
All Instructions for the MDB7600AWB
1-15 of 1,091